Power Acoustik

[tmilla 10+ year member]

i emailed power acoustik with the demensions of the space behind my seat for a recomedation for a box

here is the whole email conversationc

First i wrote

i was looking at your FUBR Series 10" subwoffer

and iwas wondering if it would fit behind the seat

in my 1985 Chevrolet C-10 its a regular cab

and also will it be safe to put this sub in a

.65

then he replied

You will need to go out to your vehicle and make measurements to see how much space you have. The FUBR-10 can be put in a sealed box of .65 cu.ft..

i thought makes sence i schould have done this in the first place

so i replied with

I went out and measured and at the bottom there is 9 3/4 inches and about 15 inches up its goes to 6 3/4 inches

my seat is kinda tilted back

thanks for the help

then he replied with

You do not have enough space for a box of .65 cuft.

you have only .57 cuft

ok whatever so i replied with

what would the deminsoins for the box i would need to build be?

Then listen to this reply

12" By 12 " by .65"

OK now how would you fit a sub in an enclosure that size??

Click to read more...

 

[SSS 18734 5,000+ posts]

I think he meant 6.5" not .65"

 

[ss3079 5,000+ posts]

Typo? Tech guy must have been thinking about the enclosure volume.

Or, 6.5" maybe? //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[tmilla 10+ year member]

oh never thought of that

thanks for that

i was like what is this guy talking about

 

[Raven 10+ year member]

The difference in Q between 0.65 cubes and 0.57 cubes shouldn't be all that different. Both are going to be very high.

 

[Shyne151 10+ year member]

You don't have to have a perfectly square box, it sounds like that's what you think... it can be any shape as long as it's deep enough for the sub to mount. You should have plenty of room for .65ft^3

http://www.project04.net/fubr.pdf check that.

 

[AznRevlAzn 10+ year member]

ahaha definitely a typo but i can't help but to laugh at that, lol.