Ported box quote for a 10" Dcon single 4 ohm subwoofer.

[fish1234 10+ year member]

Sir, I would appreciate a box quote for the sub as described in the above title. The vehicle I drive is a 2004 Honda Pilot EX. Would like to keep the ported box behind my 3rd row seat, will have to be in a wedge design from the looks of it. The depth is 15". The length is 45". I don't know if you can possibly look into the dimensions as well, just to make sure. I listen to mostly classic rock, no rap/r&b by the way. Denim from SSA suggested that I should go with a 1.0 cuft ported box and tuned to 33 hertz. Let me know if you have any questions. Thank You for your services to this forum, Sir. You come highly recommended by the way!

Click to read more...

 

[pro-rabbit 5,000+ posts]

I can double check on some measurements for you and get back with you in the morning on price and overall size.

Thank you for the kind words. We will be glad to help you with your enclosure needs.

 

[fish1234 10+ year member]

The amp is a Diamond D6 700.4 is running in three way mode, so the Dcon will be getting 350rms or thereabouts. The zip code down here is 32507.

 

[pro-rabbit 5,000+ posts]

pmed

 

[fish1234 10+ year member]

Is there any way to put a custom fit 1.0 cuft vented box behind my third row seat?

 

[pro-rabbit 5,000+ posts]

Depends on how you want it to look and how good you are at measuring. Obviously with out the vehicle in front of us we can do a nice fiberglass mold or anything to create a stealth enclosure, but anything else is possible to be built. We just need to know what kind of space you have to work with and we can go from there.

 

[fish1234 10+ year member]

Maybe a dumb question, can you even port a wedged box.

 

[pro-rabbit 5,000+ posts]

Maybe a dumb question, can you even port a wedged box.

Yep, there are several ways to port one. Just depends on the overall design and what will work with the application itself.

 

[fish1234 10+ year member]

Depends on how you want it to look and how good you are at measuring. Obviously with out the vehicle in front of us we can do a nice fiberglass mold or anything to create a stealth enclosure, but anything else is possible to be built. We just need to know what kind of space you have to work with and we can go from there.

Here is what I got for measurements, as accurate as I could get. I under sized just a little to make sure everthing fit. Overall width: 46.5", Bottom depth: 15", Top depth: 6", Rear depth: 20". The angle on the backside of the third row seat is 70 degrees. Hopefully this is all of the measurements you will need, if not let me know. I do not really know what to do for a port, any ideas please feel free to let me know what works best. I would like a shorter box, so you would have more depth to work with. I will be okay if the box fills the entire length if need be. I would like the Dcon to be flush mounted, as to make use of the maximum depth.

 

[fish1234 10+ year member]

Any more info needed? Am I good with what I sent you, Sir?

 

[pro-rabbit 5,000+ posts]

Sorry, I was looking for a PM/email but I am looking over it some how.

I'm out to lunch right now, but I will get back to you in a hour or so.

 

[fish1234 10+ year member]

I had made an order quote I thought, but whenever you find time. Hope to do business with you, Sir!

 

[fish1234 10+ year member]

Any new info?