port noise

[JoshGuy 10+ year member]

i have port noise from a 4 inch pipe port i made... i went to calculator and figured out that if i get my port up to 6 inches i should be fine and there wont be any more noise. But i was wondering can i leave my 4 inch port and and instead just add another 2 inch port or will that still have noise?

Click to read more...

 

[CAT MAN 5,000+ posts]

ad another 4'' port..

 

[JoshGuy 10+ year member]

no other way around it?

 

[CAT MAN 5,000+ posts]

no other way around it?

single 6 inch

 

[JoshGuy 10+ year member]

thats what i figured.

 

[Flastrongman 10+ year member]

4" port + 2"port does not= 6"port.

 

---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------

 

how big is your box?

 

[esmokah 10+ year member]

can you just remove the 4" and widen the hole to 6"?

 

[CAT MAN 5,000+ posts]

can you just remove the 4" and widen the hole to 6"?

if he has KY jelly he dont need to cut the hole

 

[Flastrongman 10+ year member]

nasty

 

[Drummer65 10+ year member]

add another 4" port, but make sure you adjust both lengths for tuning

 

[brandinooooo 10+ year member]

if he has KY jelly he dont need to cut the hole

Yeee it'll work

 

[esmokah 10+ year member]

if it doesn't fit, spit on it

 

[Phoenix Risen 10+ year member]

with ky you can fit a caddy in a dog house.

but single 6 will probably be easier.

 

[JoshGuy 10+ year member]

4" port + 2"port does not= 6"port. 

---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------

 

how big is your box?

Its 5.54 cu ft after displacement. i figured it needs to be a total of 20inches of port if i use another 4 inch port. but if i add a 6 inch instead it only needs to be about 10 inches

 

[ahole-ic]

Just buy a 4" precision port. The flares will fix you.