Please need info " will amps over heat "

[Jason Eden 10+ year member]

Hi I have a few old orion ams and I want to run them in the bed of my truck with a tonneau cover over it. Im going to have a blow through. I was told to maybe put them in a plexiglass inclosure and do a push pull fan system. please give me whatever info you have. Have you ever done it or what you think about it.

Click to read more...

 

[cyn 10+ year member]

do a 3-4" tube from the cab to the case with the amps... put a fan on both sides pulling air into the case... then have 1 or 2 exhaust fans on the case

 

[Jason Eden 10+ year member]

so what do you think like a fan on each side of the cab inside pulling air in then 2 fans or 1 bigger fan in center of case where amps are pulling air out into the bed area?

 

[cyn 10+ year member]

so what do you think like a fan on each side of the cab inside pulling air in then 2 fans or 1 bigger fan in center of case where amps are pulling air out into the bed area?

do like a 4" pvc tube to the case... one fan on the cab side pushing air through the tube.. one fan on the other side of the tube pushing air into the case... 1 fan or 2 on the case pushing air into the cab...

 

[Jason Eden 10+ year member]

so lets say fan on pass. side blowing air in tube then another right at the start of the case " to keep the wind speed up " then exhaust fan on other side of case then another at the driver side of cab pulling the air out. sound good ? thanks Jason