pg rsd..

[tcguy85 10+ year member]

nvm i found some adapters.nice and easy looks.just got to get 87 now.lolhttp://www.mjmautoinnovations.com/sak68t65.htm

those should work fine.

 

[sxkicker89 10+ year member]

well for 6.99 they should lol.

 

[Twilight 10+ year member]

I got those because I didn't have a jigsaw or access to one, so they were cheaper than buying a saw. The only issue I had was that the screws included weren't big enough to grab on (I have a '99 Taurus). I had to get some slightly larger ones.

 

[JimJ 5,000+ posts]

1/4"? //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Nowhere near enough mass...

 

[kingkong101 10+ year member]

what jimj? 1/4 not enough mass what does that mean

 

[kingkong101 10+ year member]

oh the adapter gotcha

 

[skydeaner 10+ year member]

Well it depends on what it is made of. But generally about 3 times that is the norm. 3/4" mdf/medite is the preference of this forum. You can use a jigsaw inside, i do it all the time. You can pick one up from wally world for 25 bucks, or meijer for 20, and a handy panel of 3/4" mdf for around 8 bucks and you can make 10 of your own custom sturdy acceptable baffles. Do it right the first time and you will save money in the long run. Get some non hardening modelling clay from your local craft store, it will say "never hardens" on it. And pick up some edead v1 sound deadener. It is only 1 buck a square foot. 30 bucks should do your doors.

 

[andrewmoore13 10+ year member]

o btw the amp thing you asked about i got a JBL PX600.2