PG 65cs

thehardknoxlife
10+ year member

CarAudio.com Veteran
I've had these in my work vehicle for a couple of weeks now and I'm very impressed by this inexpensive set. They are in my doors that are fully deadened inside and out. I attached them with a 3/4" baffle and clay to add more mass and prevent any leaks.The amp I use is a Xenon 100.4 bridged to power the set.

The signal comes from a Pioneer p860mp....(The Xenon+p860mp combo forces me to keep the gains very low...1/4 or lower...8 ohms bridged I can get it a little over 1/2 way before clipping....4 ohms bridged I can get 75-100 with gain all the way down

The tweeter is very easy on the ears. It's a little harsh on some tracks due to my EQ curve but when set to flat would perform really well for most listeners. They have decent clarity not the best but very good for what they cost.

The mid-woofer is what really makes these shine. The mid-range is the only area I feel that needs a little EQ to suit my liking.

I dropped these in over a set of Polk MM6's and they are better in every category with 1/2 the power. Although the Polk tweeter is louder but isn't as detailed and is far more harsh. A little more juice and a higher X-over point would louden them up a bit I suppose. I can't attest to the RSD's power handling as of yet, though I did beat on them pretty good running them with no filter. If I had to sum it all up in a few words it'd be "Cheap Performance".

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thehardknoxlife

10+ year member
CarAudio.com Veteran
Thread starter
thehardknoxlife
Joined
Location
Knoxville, TN
Start date
Participants
Who Replied
Replies
1
Views
533
Last reply date
Last reply from
Towncar
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top