Central Region Peoria Illinois

[slab 10+ year member]

date/time ???!!!!

 

[zack1442 10+ year member]

is this a pro competition or anything...i know i would lose easy..but im just curious what my stuff can do and what it will come out to...i will have new stuff by the time this comes around so i want to know what it can do.....

 

[hazardous0388 10+ year member]

the exact date and time is not set, although it will be next month. The set location will be at Northwoods Mall in Peoria Illinois, it is a SIMON mall so just search online for the address if you are unaware of where it is, its right off of I-74 towards the quad cities. And no it is not a pro competition, like i said originally it is a local show, but around here this is the best we get. there are no sanctioned shops around here for db drag or MECA etc. etc...

 

[slab 10+ year member]

sounds good.

 

[hazardous0388 10+ year member]

where are you from slab?

 

[xbdrx 10+ year member]

Why did this change from the riverfront?

 

[Pimpdaddyq 10+ year member]

Im about 1.5hrs from Peoria, and will attend if possible.. keep updating if possible!

Andrew

 

[hazardous0388 10+ year member]

im not to sure, their shop area is at northwoods mall but theyll probably get the spot for free there and not at hooters??? im not to sure why it changed. and why havnt you messaged me back?

 

[slab 10+ year member]

i live near fort wayne indiana which is pretty much the ohio border by highway 30

 

[devastating_mat 10+ year member]

when is the comp, we might decide to show.

 

[hazardous0388 10+ year member]

devastating mat, are you attending the benchmark show the 23rd? i did the one earlier this summer at the tire place and i will also be attending the one this sunday, date isnt finalized yet but ill keep it posted

 

[devastating_mat 10+ year member]

yes we are, I'll be rebuilding in the parking lot, just cutting out a false floor, sprayfoam, box, etc.. should be an interesting day, but what can you expect to hit doing the install at the comp?

 

[hazardous0388 10+ year member]

i dont really know right now, i had MM3000.1 blow on me so now i bought a American Bass 120.1 and i only have it wired at 1.2 ohm and havnt had time to wire it at 0.5 ohm yet. Im going to be using an AudioControl Mic on friday after i wire it to 0.5 and test it then to see where I hit the best at when i retune the amp. Im hoping at least 145 db. what setup will you be running?

 

[gothsm 10+ year member]

when there is a date and time someone send me a message about it I might drive down to check it out

 

[hazardous0388 10+ year member]

well the guy decided to hold off until next season...thus giving more time to get the word out and more time to plan...I will post it when it happens though.