Ordered 2 Image Dynamics ID 10" Now Box time! Box dimensions?

[hemi4me? 10+ year member]

Guess I am confused how (since the rear deck has lots of crevesses and high and low spots to get the thing mounte up there with sealing it off the best.

 

[Megalomaniac 5,000+ posts]

you should do something like this if you are talking rear-deck installs. this is in a friends car, Lexus is300. his name is ItalynStylion here.

 

[hemi4me? 10+ year member]

So is this right or no?

27" long (C pillar to C pillar)

11" wide (glass to seat)

10" deep (rear deck to trunk floor)

awesome. 1.59 cubes. so now you have to figure out what kind of cuts you need to make. well this is some voodoomath that you will get used to. i usually cut my sides of the enclosure, to the exact internal dimensions and let the other sides overlap. so- you will be using 3\4" MDF - aka .75" MDF. do NOT FORGET to add an overlap to BOTH sides. as such.

top + bottom will be the same size. since we are looking at 11x27, we need to overlap the other pieces. so we need to add .75 for EACH side we overlap.

top piece = 12.5x28.5

bottom piece = 12.5x28.5

left side = 10x11

right side = 10x11

front = 10x28.5

back = 10x28.5

 

[hemi4me? 10+ year member]

you should do something like this if you are talking rear-deck installs. this is in a friends car, Lexus is300. his name is ItalynStylion here.

Cool, but I really wanted the subs firing up in the cabin to reduce rattle. Something like that box tho!

 

[Vermithrax 10+ year member]

req made a slight mistake in his math. 27x11x10=2970/1728=1.72cf. No biggie, the dimensions he gave will work fine. If you wanted to be right at .75 per sub reduce the box width to 26" external or 26.75" if you put a divider to make separate chambers.

 

[hemi4me? 10+ year member]

Are the sep chambers the way to go?

 

[Vermithrax 10+ year member]

Matter of preference. I use sep. chambers in multiple driver boxes. It's up to you.

 

[hemi4me? 10+ year member]

Any suggestions on an amp to run these?

I am thinking $400 and under 400-600 watts

Audison 1.400 is on ebay $340.00

Alpine MRD-M1005

Kicker 650zx

 

[Vermithrax 10+ year member]

I'm hearing good things about the Pioneer GM-D8400M. Small footprint and is rated at 600x1 at 2 ohms.

 

[hemi4me? 10+ year member]

I just bought a Big Bell Memphis amp from another member. I am so stupid... I was not in the market for such a LARGE AMP! LOL

 

[Megalomaniac 5,000+ posts]

Cool, but I really wanted the subs firing up in the cabin to reduce rattle. Something like that box tho!

There is absolutely no trunk rattle //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif although he did deaden the hell out of the rear deck though

 

[jsapp720 10+ year member]

you should do something like this if you are talking rear-deck installs. this is in a friends car, Lexus is300. his name is ItalynStylion here.

i really like this instale very clean good awesome

 

[hemi4me? 10+ year member]

Can anyone tell me wha kind of wood this is? Used for the baffle? And if anyone local to AZ knows how to build a baffle anywhere near like this I would love to chat or pay you to make one LOL

Check the link out..

http://www.imagedynamicsusa.com/forum/index.php?autocom=gallery&req=user&user=4&op=view_album&album=31

 

[req 5,000+ posts]

i totally made a mistake. the depth of the driver is 5.5" not 9.125

i was a bit toasted that night and i made a mistake in reading that pdf.

my bad //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hemi4me? 10+ year member]

No prob!

I wish someone lived near me in Scottsdale/PHX/Mesa/Tempe AZ. Anyone know a good guy that can make a box here?

email smartbet2@gmail.com