Oa

[Linkz 10+ year member]

That will do fine. try to get it to 3.5cuft if you can. It will do well for the mid and lower 30hz range.

 

[SicAudio 5,000+ posts]

So if i threw in 2 apsm1300s with 1/0 wiring to both and a 800-1000 cranking batt in the back and then put the OA 12's wired at 1 ohm, in a 3 cubed box at 33 htz. What about that?

1/0 to a 1000 watt amp? lil excessive.. not to mention it only accepts 4g lol

but also if the subs are dvc4 each sub amp combo can only be wired at 2 ohms per... unless they strap... either way same power..600 per sub...

APSM-1300

• 300W RMS@4 Ohm (

• 600W RMS@2 Ohm (

• 1000W RMS@1 Ohm (

bigger box will make the lows better.. and on ur small power I would highly recommend bigger box...

 

[Gbob2003 10+ year member]

Distrobution blocks man. And they are both one ohm stable. so if i run two of them and wire both subs to one ohm. It would be 1 amp per 1 sub. Thats my intentions

 

---------- Post added at 12:08 PM ---------- Previous post was at 12:08 PM ----------

 

Im buying a 50 foot spool so i can do my big 3 at the same time

 

[THATpurpleKUSH 5,000+ posts]

I dont think the apsm's will take 0 ga. They only draw enough current to need 4. You could do a 0 to distro block and split it into 2 4ga's. And I hope the battery you are looking to add isn't a starting battery, you want to use a deep cycle battery with a low esr.

 

[SicAudio 5,000+ posts]

What do you guys think would be a good box build for 2 d4 obsidian audio's? They are going into a 2003 mustang. They will also be powered by 2 apsm-1300's. Help please

Distrobution blocks man. And they are both one ohm stable. so if i run two of them and wire both subs to one ohm. It would be 1 amp per 1 sub. Thats my intentions 

 

---------- Post added at 12:08 PM ---------- Previous post was at 12:08 PM ----------

 

Im buying a 50 foot spool so i can do my big 3 at the same time

you really have no fkin clue do ya dude?

and it is obvious you cant read either...

YOU CANT WIRE A DVC4 SUB TO 1 OHM!!!!

got it now asshat?

 

[Gbob2003 10+ year member]

calm down bro. its just a forum