1. Product:
NVX JAD 1200.1 1200W RMS Monoblock Class D
2. Specs:
Class D Monoblock Amplifier with Bass Remote
RMS Power Rating:
4 ohms: 500 watts x 1 chan.
2 ohms: 800 watts x 1 chan.
1 ohm: 1200 watts x 1 chan.
Non-regulated efficient S.M.P.S power supply design
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Power and ground Gauge adapter included (Up to 0 gauge)
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable subsonic filter (20-38 Hz, 24 dB/octave)
Variable low-pass filter (40-320 Hz, 24 dB/octave)
Damping factor: 200
Input Sensitivity: 200mV-6V
Frequency response: 20-200 Hz
Accepts 8, 4, 2, and 1/0 Gauge wire with gauge adapter (Included)
Also found as: JAD12001, JAD-12001, JAD1200
Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H
3. Description/Condition:
This amplifier is brand new. I took it out of the box and tested it on my bench just to make sure it worked since I was planning on using it on a project car many months from now. Decided to go a whole different route.
Amp has nothing but great reviews and IT DOES WAAAY OVER RATED POWER!! Look at the video on youtube when they ran it on the SMD Dyno //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
4. Price: :
$220 SHIPPED! I ship within the same or next business day! No Trades!
5. Pictures:
NVX JAD 1200.1 1200W RMS Monoblock Class D
2. Specs:
Class D Monoblock Amplifier with Bass Remote
RMS Power Rating:
4 ohms: 500 watts x 1 chan.
2 ohms: 800 watts x 1 chan.
1 ohm: 1200 watts x 1 chan.
Non-regulated efficient S.M.P.S power supply design
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Power and ground Gauge adapter included (Up to 0 gauge)
Soft start turn-on
Mono channel operation
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable subsonic filter (20-38 Hz, 24 dB/octave)
Variable low-pass filter (40-320 Hz, 24 dB/octave)
Damping factor: 200
Input Sensitivity: 200mV-6V
Frequency response: 20-200 Hz
Accepts 8, 4, 2, and 1/0 Gauge wire with gauge adapter (Included)
Also found as: JAD12001, JAD-12001, JAD1200
Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H
3. Description/Condition:
This amplifier is brand new. I took it out of the box and tested it on my bench just to make sure it worked since I was planning on using it on a project car many months from now. Decided to go a whole different route.
Amp has nothing but great reviews and IT DOES WAAAY OVER RATED POWER!! Look at the video on youtube when they ran it on the SMD Dyno //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
4. Price: :
$220 SHIPPED! I ship within the same or next business day! No Trades!
5. Pictures:
Last edited by a moderator:
