Nc Meet Suckas!!!!!

[ramos 5,000+ posts]

24th ?? . I could probably swing that , have to give me an address . //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[NightDrifter05 10+ year member]

I don't know if this mean's anything to you guy's but the shop I'm with in Roanoke Rapids NC is having a show on April 8th. It is going to be a 2x DB Drag and 3x NSPL. We normally have a pretty big turnout at least depending on weather. But like I said I don't know if any of you are interested in coming but if you are just let me know and I'll give you all the information. Our last show was actually a HUGE turn out, had alot of ground pounders show up then of course Alan Dante (this is the same shop where he did the 179.3). We also normally have a sale the day of the show but I'll have to verify that this time around. But if anyone is interested in coming just let me know and I'll get you the address of the shop...or you can just check this out http://www.termpro.com/asp/members2.asp?Who=13&MemberID=9132 . It has all the results from our other shows and some pictures.

 

[ramos 5,000+ posts]

Can't do the 24th , my nieces birthday //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Worlddre 5,000+ posts]

well in that case we must think of a new day

 

[hoss 5,000+ posts]

good, cause the 24th was getting full for me too...

april 21st.

 

[uncfanforlife07 10+ year member]

i know this doesnt relate to the nc meet, but does anyone in NC, prefer aroud charlotte, know how to work on amps or know a good shop that isnt very expensive, i need a few things ( i think they might be called resistors? ) soldered on. if i can get that working then my system should hopefully work again. any help would be greatly appreciated. i went to two car audio places in charlotte and was quoted 100 and 130

 

[JimJ 5,000+ posts]

$100 isn't a bad price for something like that, from your other post it sounded like the FET's needed to be soldered on...

 

[JimJ 5,000+ posts]

Can't do the 24th , my nieces birthday //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Is that the Dora the Explorer one?

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[uncfanforlife07 10+ year member]

$100 isn't a bad price for something like that, from your other post it sounded like the FET's needed to be soldered on...

i dont know what FET's are but i need 8 of the little black things that have like 3 straight pieces coming out of them soldered on, i can post a pic if i need to

 

[hoss 5,000+ posts]

i dont know what FET's are but i need 8 of the little black things that have like 3 straight pieces coming out of them soldered on, i can post a pic if i need to

sounds like the mosfet transistors. contact jake at sundown audio. he loves that kind of stuff.

 

[uncfanforlife07 10+ year member]

sounds like the mosfet transistors. contact jake at sundown audio. he loves that kind of stuff.

how do i do that, is he a member on here? i looked up sundown audio and they have a bunch of stores

 

[hoss 5,000+ posts]

how do i do that, is he a member on here? i looked up sundown audio and they have a bunch of stores

http://www.sundownaudio.com/

email jake on there (hint: he is the only person on the cantacts page)

 

[uncfanforlife07 10+ year member]

http://www.sundownaudio.com/
email jake on there (hint: he is the only person on the cantacts page)

ok lol sorry, thanks

 

[Worlddre 5,000+ posts]

april 21st works for me too

 

[Blove1991 10+ year member]

April 21st sounds great