My Small review on Morel Tempo 6

[buggsson 10+ year member]

Could it have anything to do with the install? I was thinking in ways like on/off axis and the like, that is, the directions they are pointing towards the listener?

 

[Moe Lester 10+ year member]

And all crossovers are interchangeable as long as they all use 4 Ohm Mids and 4 Ohm Tweets (which is ever set of crossovers I have ever seen). All the crossover sees is a resistance and that determines the crossover point.

I wouldn't say that they are interchangeable. I dont know the crossover points or slopes on the type R or the Morels, but just as an example, if the Morel standard crossover point is around 4.5khz at 12db and the Type R crossover point is set to 2.5khz at 12db then you still risk damaging the morel tweeter even though the crossover points are not changing due to the ohm load.

 

[qkassidyw 10+ year member]

^^^You are correct, but when I changed out the crossovers I couldn't hear a difference as far as if the tweet was getting any extra or less and same with the mid.

Someone else mentioned the axis, I had them both pointed towards the driver in the door sill and I switched the polarity of the drivers this morning and it made a big difference.

But, I still am not impressed with the actual sound of them. i have installed many components in my life so I know how to make them sound good but I have never had this much trouble trying to do it...