My Excelon sounds like s*e*x !

[Prowler573 5,000+ posts]

My Excelon sounds like s*e*x !

Does it squeal and shout your name or something ? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

With the software that the higher-end eXcelons are coming with nowadays you can make it do that if you choose (on compressed music files at any rate) //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Puggsley456 10+ year member]

I have a an older Excelon deck.....When it went in for repair I bought a pioneer 7800. But after ol'faithfull came out of the repair shop it went straight back in my car. It's ease of use, and performance was leaps and bounds above the pioneer IMO.

I listen to it with the NF at +3 and volume between 23-28/35 with the bass flat.

 

[chub8989]

yea i have the same head unit, and when its not goin into protect mode it also sounds like ***, but since i cant get anyones help from anyone to help me out and fix it.....i cant enjoy it

 

[yacob.naif 10+ year member]

your speaker wires are probably grounding out somewhere

and if you have it hooked up to stock speakers, they're probably a funky impedance

lots of factory speakers have very low impedance.....

i think the factory speakers in my vw were 1.8 or something like that....

 

[chub8989]

i dont have factory speakers.

 

[yacob.naif 10+ year member]

well, unhook your speakers from the deck and see if it still goes into protect

good place to start

 

[chub8989]

and what should i do if it still does it with them disconnected?

 

[yacob.naif 10+ year member]

get the head unit fixed, cause it's got a bad channel, apparently

 

[yacob.naif 10+ year member]

if you got it from an authorized retailer, kenwood will actually pay for it to be fixed locally, they have one of the best warranties around

if you got it from an unauthorized seller, you're on your own.

my xxv-02A amplifier was dead out of the box, and it only cost about $100 to have a channel replaced, and worked great after that

 

[chub8989]

alright, thanks for the info