UndercoverPunk
5,000+ posts
DOT
I am sorry but I do not have a rating for that but I can tell you that the
amp will operate at that load.
Sincerely,
Technical Department
URL: www.audiobahn.com
email: tech@audiobahn.com
Audiobahn Inc.
114 South Berry St.
Brea CA. 92821
(714)988-0400
-----Original Message-----
From: UndercoverPunk@donttrytoemailme.com
Sent: Tuesday, June 21, 2005 11:37 AM
To: tech@audiobahninc.com
Subject: A6601t Bridged at 8 ohms.
Hello, I have an A6601t and I will be running an active front stage off
of it for the time being. The mids I have are SVC 8 ohm (as they are ment for HT use). I was wondering what the output of the A6601t was for a bridged set of channels at 8 ohm. Also my tweeters are 6 ohm, any thoughts as to what a single channel might put out RMS a 6 ohm?
Thanks for your time,
Jason Gillespie
amp will operate at that load.
Sincerely,
Technical Department
URL: www.audiobahn.com
email: tech@audiobahn.com
Audiobahn Inc.
114 South Berry St.
Brea CA. 92821
(714)988-0400
-----Original Message-----
From: UndercoverPunk@donttrytoemailme.com
Sent: Tuesday, June 21, 2005 11:37 AM
To: tech@audiobahninc.com
Subject: A6601t Bridged at 8 ohms.
Hello, I have an A6601t and I will be running an active front stage off
of it for the time being. The mids I have are SVC 8 ohm (as they are ment for HT use). I was wondering what the output of the A6601t was for a bridged set of channels at 8 ohm. Also my tweeters are 6 ohm, any thoughts as to what a single channel might put out RMS a 6 ohm?
Thanks for your time,
Jason Gillespie
