MTX Thundeform???

95F150
10+ year member

Memphis MClass
you obviously need a tcab to sound good...

j/k I have found that MTX makes some pretty decent pre-fabs...I am not sure if you can get those without the sub though...you may want to call them

mtx.com

I am sure there is some contact info there

 
you obviously need a tcab to sound good...
j/k I have found that MTX makes some pretty decent pre-fabs...I am not sure if you can get those without the sub though...you may want to call them

mtx.com

I am sure there is some contact info there
Yeah, I am going to tommorow, because I am not gunna spend that much on it, it it doesn't fit right.

See if they will give me the EXACT dimensions!!!

And hey, it you can't get it without, I will just blow it up! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

And that would be a lot easier than a custom fiberglass!

 
look for an "unloaded" thunderform, which is just the box with polyfill. "loaded" is the most common, usually with 10" 4500 sub(s) mounted. amplifed thunderforms have both subs and an amp in the box as well.

the one i have for my dakota is decent for my needs, having some bounce while keeping the back seat useful.

3f3e245e.jpg


 
The only place I can find and unloaded one at is on Crutchfield, and they want $219, when I can get a loaded one for $205 on ebay.

Dang

Guess I am gunna have to blow stuff up!

Anyone know of any links to buy a cheaper unloaded one?

 
Well it looks as though this won't fit as perfect as I thought it would.

Geeze

I have VERY limited space. Can anyone reccomend the SMALLEST box they have seen, depth wise, I don't really have time for fiberglass due to work.

 
Ok guys, I am gunna downgrade from (4) 8"s to (2).

I was gunna fiberglass 4 behind the seat.

I have decided to fiberglass them at the bottom of the doors, would they sound decent?

Which way should they face?

Hmm, 2 in each door could work.

 
Do you have a reg. cab or extended cab f150?

The problem with fibergassing in the doors is you may get alot of unwanted vibration(noise) from the door panel itself. If you have the room an enclosure behind the seat is definitely the way to go, an for a couple of 8"s it really would'nt take up much space.

I know for a fact there's a ton of enclosures out there made just for the f150.

Check out "onix" on ebay.

 
Do you have a reg. cab or extended cab f150?The problem with fibergassing in the doors is you may get alot of unwanted vibration(noise) from the door panel itself. If you have the room an enclosure behind the seat is definitely the way to go, an for a couple of 8"s it really would'nt take up much space.

I know for a fact there's a ton of enclosures out there made just for the f150.

Check out "onix" on ebay.
Nope, NO ONE makes a custom box for a 95 Single Cab F-150 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Do you have a reg. cab or extended cab f150?The problem with fibergassing in the doors is you may get alot of unwanted vibration(noise) from the door panel itself. If you have the room an enclosure behind the seat is definitely the way to go, an for a couple of 8"s it really would'nt take up much space.

I know for a fact there's a ton of enclosures out there made just for the f150.

Check out "onix" on ebay.
Even if I sound deadened the shit out of the doors???

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

95F150

10+ year member
Memphis MClass
Thread starter
95F150
Joined
Location
Thomasville, GA
Start date
Participants
Who Replied
Replies
10
Views
866
Last reply date
Last reply from
95F150
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top