MTX RT-X02A xover, and MB Quart 200.72 xover

[Funkyskins 10+ year member]

Item(s) for Sale:

1-MTX RT-X02A xover

4-MB Quart 200.72 xover

Item(s) Description/Condition:

MTX RT-X02A xover - Good Condition

MB Quart 200.72 xover - Good Condition

Price:

1-MTX RT-X02A xover -$30

4-MB Quart 200.72 xover - $50 Each

Shipping and Miscellaneous Item Information:

Willing to negotiate price and shipping.

Item Pictures:

View attachment 26539342View attachment 26539341View attachment 26539340View attachment 26539339

Click to read more...

 

[Funkyskins 10+ year member]

Bump. $140 for everything.

 

[zinda 10+ year member]

When I sold my MB Quart xovers like these, they were Brand new in the box and I only was able to get $40 for the pair, if you can get $30 for both I'd take it!

 

[Funkyskins 10+ year member]

$70 for all 4 MB Quart xovers.

 

[btolenti 10+ year member]

What's the crossover point on the Quarts?

 

[Funkyskins 10+ year member]

I'm not much of a car audio guy. Would the crossover point be written on the Quarts?

 

[btolenti 10+ year member]

Usually doesn't, unless it has an adjustable switch for the levels. Do you know what the model of the component set these came from? You could then look at the owners manual for the data.

 

[Funkyskins 10+ year member]

They were used with Precision Power A404.2 and A600.2 amps. There is no adjustable switch for levels but there are pins labeled 0dB, -3dB, and -6dB. There are also pins labeled biwire and standard. The connects are W-, W+, T-, T+, INH-, INH+, INL-, INL+. Don't know if this helps.

 

[btolenti 10+ year member]

Not the amps......what MB quart component set did the crossovers come from.....

MB Quart Info Archive

 

[zinda 10+ year member]

What's the crossover point on the Quarts?

Most MB Quart tweets have a set 3600Hz crossover setting, but it may be slightly different per crossover. I doubt it will vary much between the different passive crossovers since they are intended for use with specific speaker packages, they will almost always be using a very similar or exact same tweeter per series of component sets. The only thing they will be changing is the size of the midbass, with a higher low cut off for smaller sizes or the addition of the midrange speaker. That would bandpass the midbass and maybe raise the tweeter low cross point but not by much since they want the tweeters to handle most of the sound.

 

[p-funk]

Would you happen to still have the MTX RT-X02A xover? If so, how much would you sell it for? Thank you.