MTX Jackhammer

I got a friend with 2 12" jackhammers in a custom ported box with 975w rms goin to em they are louder then my setup. But not by a ridiculous amount.....and I'm only running one 10" type r with a peoenix gold x400.1 powering em. I would prolly say to go with something else. They are hard hitting subs tho. just not the best bang for the buck, he spent alot of money on his system.

 
I got a friend with 2 12" jackhammers in a custom ported box with 975w rms goin to em they are louder then my setup. But not by a ridiculous amount.....and I'm only running one 10" type r with a peoenix gold x400.1 powering em. I would prolly say to go with something else. They are hard hitting subs tho. just not the best bang for the buck, he spent alot of money on his system.
lulz

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
882
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

DaBucs97

10+ year member
Junior Member
Thread starter
DaBucs97
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
17
Views
1,373
Last reply date
Last reply from
guting
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top