mtx blue thunder

  • 2
    Participant count
  • Participant list

kingbrew06
10+ year member

Member
i have three 10s they are workin but the rubber in between the cone and the edge of the subs has come off could this be fixed if so how much and would anyone want to buy them. i also have two amps i wanna sell a boss 2000w mono and a bazooka 500w mono 100 a peace

 
If the rubber is in good shape you can use epoxy or ca to re-secure the surround. Making it look good will be your biggest issue.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
779
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K
@Deiimos Hit it on the spot from the beginning of a bad ground. Excellent! Im happy to hear that you went through some procedures to locate the...
20
1K

About this thread

kingbrew06

10+ year member
Member
Thread starter
kingbrew06
Joined
Location
nashvile'tn
Start date
Participants
Who Replied
Replies
2
Views
404
Last reply date
Last reply from
filtor1
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top