Mtx 6500d

Good amp...mine has yet to let me down.

Although, I know a guy who blew his LP filter on it...//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

- Steve

 
Good amp. Good speakers. I would say, couldn't get any better than that, for the price! But, I do have one question for you. How come people keep saying these blow at 2 ohms? I have listened, and tested, these amps, and they don't blow at any volume. As a matter of fact, they sound great, at high volumes! Then again, it's the dummies who tell me this crap, about MTX's blowing at 2 ohms. He said some mess about they were KNOWN to blow, at 2 ohms! Now, I've been reading stuff about these amplifiers, and nobody has said anything of the sort, about them blowing. Except, for this one guy. Perhaps, he had to many speakers hooked up to the amp, put it up on a high volume, and blew his amp, AND speakers. But, I don't know.

brad.farmer

 
Originally posted by brad.farmer I have listened, and tested, these amps, and they don't blow at any volume. brad.farmer
What equipment did you use to test these amps, and

what kind of numbers did you get from your testing?

 
Originally posted by brad.farmer Good amp. Good speakers. I would say, couldn't get any better than that, for the price! But, I do have one question for you. How come people keep saying these blow at 2 ohms? I have listened, and tested, these amps, and they don't blow at any volume. As a matter of fact, they sound great, at high volumes! Then again, it's the dummies who tell me this crap, about MTX's blowing at 2 ohms. He said some mess about they were KNOWN to blow, at 2 ohms! Now, I've been reading stuff about these amplifiers, and nobody has said anything of the sort, about them blowing. Except, for this one guy. Perhaps, he had to many speakers hooked up to the amp, put it up on a high volume, and blew his amp, AND speakers. But, I don't know.

 

brad.farmer


YOU DON'T HAVE A CLUE WHAT YOUR TALKING ABOUT DO YOU

 
my favourite part is when he said that he couldnt get any better for the money...

MTX subs are crap... except the 8000 series and they are mediocre... the RFL is sick... but that one doesnt count, lol.

the amp is definitely decent, but by no means a bang for the buck, lol.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
841
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

MTXBlockShaker

Junior Member
Thread starter
MTXBlockShaker
Joined
Location
Indiana
Start date
Participants
Who Replied
Replies
9
Views
754
Last reply date
Last reply from
Wonderbread
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0

New threads

Top