mtx 6000 12'' specs

[94wannabe 10+ year member]

I have 2 MTX 6000 series 12'' subs I'm building a box for. I'm trying to find the volume displacement for these subs. I searched high and low on the forums and on the MTX site, Idk, I must be blind. So if any of you can give me the specs on these subs, it be very much appreciated.

Thanks,

"96wannabe"

Click to read more...

 

[95TsiAWD 10+ year member]

1.25 cu ft sealed is optimal for those subs.

goto http://www.mtx.com , click car audio, then at the bottom of the page that comes up click archive.

 

[94wannabe 10+ year member]

thanks

 

[94wannabe 10+ year member]

I got another question. I want to port the box and i found the port specs on the mtx sight, but thats for only 1 sub, so would i double the port dimensions, or leave them alone?

 

[95TsiAWD 10+ year member]

I got another question. I want to port the box and i found the port specs on the mtx sight, but thats for only 1 sub, so would i double the port dimensions, or leave them alone?

IMO, for best results with ported, build a partition in the middle and have the subs in seperate eclosures, know what I mean? so there would be 2 ports.

 

[swaptrex 10+ year member]

id seal them if i were u

 

[biiqdanz 10+ year member]

I had 2 6000's and upgraded to 8000 but im still using the same box but the thing is the 8000;s require more space but this box is 1 cubic ft sealed so i would suggest this too as well... your choice buddy