MT's

[Cahm Rohn 10+ year member]

I just got another MT motor but now im in a bind, I have the option of running 2 10's or 2 15's in the trunk of the Buick. My question is should I run the 10's in about the same size box I have now (4-5 cubes @ 32) or go with a sick design I came up with using 6in external aero's through the rear deck in about 8-10 cubes in the mid 30's for the 15's. The amp(s) depend on the coil config which I have not chosen yet any suggestion would be helpful.

Click to read more...

 

[stuckinok 5,000+ posts]

well 2 mt 15s need more then 10 cubes

 

[woody89 10+ year member]

Depends on what you want, 15's would be louder, if you could fit them properly.

 

[matrxx dude 5,000+ posts]

well 2 mt 15s need more then 10 cubes

why do they?//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Abel 10+ year member]

Go with 2 10's, you dont have the room for 15's

 

[Cahm Rohn 10+ year member]

If I trunk build I can get close to 12-13 but My one in 4.8 cubes gets hella loud

 

[stuckinok 5,000+ posts]

why do they?//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

um...i thought they needed 6cubes each

 

[jeepintn 10+ year member]

well 2 mt 15s need more then 10 cubes

why do they?//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

yea, why? i think bamaboy is running his off of 10. but anyways, i would go with the 15's, but im an overkill type

 

[bballrrt06 10+ year member]

2 15s would be fine in 10 cubes

 

[matrxx dude 5,000+ posts]

2 15 mt's need only around 6 cube to get loud as hell.if you want better low's do 8 cube.

 

[stuckinok 5,000+ posts]

oh wait its the APX that needs 6cu.......sorry

 

[Cahm Rohn 10+ year member]

keep the suggestions comming ill be back in a sec, home made tacos FTW

 

[BassAddictJ 5,000+ posts]

2 15 mt's need only around 6 cube to get loud as hell.if you want better low's do 8 cube.

ur talking 6 cubs each right? just making sure

 

[matrxx dude 5,000+ posts]

no together.we not talking about 18's here.

 

[BASSMEKANIK 10+ year member]

if just for spl i would say go with the 15's but if your going for something musical go with the 10's. because to get the 15's musical your going to need a pretty good sized box.

 

[Brian Owens 10+ year member]

We did a single MT 15 in 4 cubes tuned to 32 Hz and it sounded pretty darn good.

My 18's are in 12.6 ft^3.

 

[bdawson72 5,000+ posts]

I just got another MT motor but now im in a bind, I have the option of running 2 10's or 2 15's in the trunk of the Buick. My question is should I run the 10's in about the same size box I have now (4-5 cubes @ 32) or go with a sick design I came up with using 6in external aero's through the rear deck in about 8-10 cubes in the mid 30's for the 15's. The amp(s) depend on the coil config which I have not chosen yet any suggestion would be helpful.

One of the guys in my car audio team has a grand am with 2 MT15's firing into the car and 4 hifonics 1605d's in a Grand Am...with 4 aeros ported through the rear deck

 

[Cahm Rohn 10+ year member]

I didn't want to mess with the rear deck at first but since their are holes cut into it I figured why the hell not.

 

[Cahm Rohn 10+ year member]

If I did go with the aero's what would be the best way to fire the subs.

 

[TeamPSI 10+ year member]

MT15's will do just fine in less than 4ft. Ive run them in 2.5ea and had GREAT results.