Most volume for 10w7 on 1000 JL watts

[nickolas_j_t 10+ year member]

I have a kenwood H.U. and the 10 W7 is temporary. I have aJL 1000.1 and it was ment for the 13W7, but it was blown when I got it from EGAY. Whats the max volume i can put to the 10 without it suffering. I plan on selling it in about 3 months.

Click to read more...

 

[WhiteEX 10+ year member]

Bottom of the page...

http://mobile.jlaudio.com/products_subs.php?series_id=5

 

[krainium 10+ year member]

Depending on where you gain is set you could turn it all the way up.

 

[nickolas_j_t 10+ year member]

I know the RMS... I just don't want to put to much to it.... Can I set the gain properly without an electronic device?

 

[krainium 10+ year member]

Just go buy a DMM there only $15-20 and set it right.

 

[I Like Waffle]

All you need to do is turn the radio up a little above your max listening level, then go adjust the gain on the sub amp. Make sure its not getting too hot or bottoming out. Shouldnt have to worry about clipping im sure the sub will bottom out before the amps gain is high enough to clip. Make sure you set the ssf right too.

 

[BloodyGuts335i 10+ year member]

how do you set the gains using a ddm? I usually just set my HU flat and turn the volume up and start from there..

 

[nickolas_j_t 10+ year member]

I want to make this thing flat out beat without over powering it until my new 13W7 comes in.

 

[its_bacon12 10+ year member]

You won't overpower it unless you crank the gains and bass boost.

That sub can handle it cleanly given the box allows more power before mechanical limits. Worry more about misusing it in an improper box than overpowering it.