Mojos are smoked! (pic), will i be happy with HDC3's??

****, //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif why you got to jinx me like that??
Well, the logic i that you're supposed to analyize WHY your setup went to poop and go from there. It just sounds like you bought some subs as replacement hoping that will fix your issue. It might, who knows. But after myself having 29389238 different spl setups over the years, I usually like to know wtf happened and work on that problem first before forking out more cash on a fix.

 
I dunno about 32 hz, even though I was in your same position about four weeks ago. I tuned mine to about 36 hz and they hit the lows amazingly well. However I wanna get a little more SQ out of them, so I might make a new box and experiment until I get it to the point I'm satisfied. But great subs and you will be happy.

 
why not build a box in the back seat and use the trunk for batts and amps???
Maybe ill just run some pvc out of my box right behind my headrest. . . and take an extra pipe and put it on the dash for a point blank burp to the TL //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 
Maybe ill just run some pvc out of my box right behind my headrest. . . and take an extra pipe and put it on the dash for a point blank burp to the TL //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif
it's been done but it was ran under the car and in the dash up to the defrost vent.

I also seen a escort that had a big 10" hole cut under the passenger seat

 
Well, the logic i that you're supposed to analyize WHY your setup went to poop and go from there. It just sounds like you bought some subs as replacement hoping that will fix your issue. It might, who knows. But after myself having 29389238 different spl setups over the years, I usually like to know wtf happened and work on that problem first before forking out more cash on a fix.

x1353332432

its funny bc he wont even answer the ?

i see this thread inn the future "hdc3s smoked1 (pic), will i be happy with something more expensive??

 
HDC's are awesome subs especially for the money,
Get the Nighthshades if your wanting to go one step better!
I havent seen anyone showing the nightshades can play louder off music yet.. I have my doubts about it playing louder with less power, but anything can happen I suppose..

 
Well, the logic i that you're supposed to analyize WHY your setup went to poop and go from there. It just sounds like you bought some subs as replacement hoping that will fix your issue. It might, who knows. But after myself having 29389238 different spl setups over the years, I usually like to know wtf happened and work on that problem first before forking out more cash on a fix.
x1353332432
its funny bc he wont even answer the ?

i see this thread inn the future "hdc3s smoked1 (pic), will i be happy with something more expensive??
Thank you!!!That is what I have been saying all along.There is a reason this happened.Like Snoop said those subs are on the same level as the HDC3's.With crispy coils and the rubbing that was in the picture it appears to be clipping going on.That is why I asked if you set your gains.Not just turn them to where you THINK they should be.

Before you install the new AQ's please set your gains to the proper levels with a DMM;)

 
Thank you!!!That is what I have been saying all along.There is a reason this happened.Like Snoop said those subs are on the same level as the HDC3's.With crispy coils and the rubbing that was in the picture it appears to be clipping going on.That is why I asked if you set your gains.Not just turn them to where you THINK they should be.Before you install the new AQ's please set your gains to the proper levels with a DMM;)
Will do. problem is when i received the amp the gain setting writing was rubbed off during shipping. so i set my gains low. the rubbing is from mounting the motor on and it was rubbing cause it was off slightly. i fixed that but then the damage was already done. coils are browned cause im pushin 2k rms and played at full tilt all the time and have had them for over a year and i drive 100+ miles a day for work. bound to go out soon and im tired of memphis. want something different

 
tuning is too low and box is too small for 15's. And you probably don't have enough port area. Other then that you'll be happy with the HDC's...//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
it's been done but it was ran under the car and in the dash up to the defrost vent.I also seen a escort that had a big 10" hole cut under the passenger seat
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:
 
Will do. problem is when i received the amp the gain setting writing was rubbed off during shipping. so i set my gains low. the rubbing is from mounting the motor on and it was rubbing cause it was off slightly. i fixed that but then the damage was already done. coils are browned cause im pushin 2k rms and played at full tilt all the time and have had them for over a year and i drive 100+ miles a day for work. bound to go out soon and im tired of memphis. want something different
Those MOJO's are 1500 RMS daily and that's probably conservitive.The problem was clipping.To much heat was generated that the woofer couldn't disapate.That is why the coils are crispy.I push almost 2k a piece daily to my DR's and there only rated at 1000 rms.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Thread starter
shakinghorizons
Joined
Location
NorthCO
Start date
Participants
Who Replied
Replies
41
Views
2,182
Last reply date
Last reply from
audioarsonal
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top