pointblank9957 10+ year member
Junior Member
My setup is:
Power Acoustik PTID7002NR 7" Touch Screen deck,
4awg Wiring
Infinity 200w Amp powering:
2 x 2" Infinity Tweeters
2 x 5.25" Infinity Drivers
2 x Kicker DS693 6x9"
Pioneer GM-5500T 820w Amp powering:
1 x Power Acoustik MOFO-124X 12" sub in a:
Atrend B-Box .9sqft Enclosure
The MOFO has DVC, wired in parallel 2ohm, I would like to bridge the amp with 2ohm but if I'm not mistaken, that would be 1ohm, which it cuts out. At the moment its at 2ohm on one channel (225w rms), bridged at 2ohm it should be 450rms and at 1ohm SHOULD be around 900rms. It hits decently, but not as much as it should... its got a 21lb! magnet! Looking for a bigger amp, something around 1200rms.
Power Acoustik PTID7002NR 7" Touch Screen deck,
4awg Wiring
Infinity 200w Amp powering:
2 x 2" Infinity Tweeters
2 x 5.25" Infinity Drivers
2 x Kicker DS693 6x9"
Pioneer GM-5500T 820w Amp powering:
1 x Power Acoustik MOFO-124X 12" sub in a:
Atrend B-Box .9sqft Enclosure
The MOFO has DVC, wired in parallel 2ohm, I would like to bridge the amp with 2ohm but if I'm not mistaken, that would be 1ohm, which it cuts out. At the moment its at 2ohm on one channel (225w rms), bridged at 2ohm it should be 450rms and at 1ohm SHOULD be around 900rms. It hits decently, but not as much as it should... its got a 21lb! magnet! Looking for a bigger amp, something around 1200rms.
