Metered my MT10

[bamaboy 5,000+ posts]

i cry out loud for the MT only doing 137. gimme dat sub and i'll show you what to do with it. then again, you wouldn't get it back working as i'd use my bud's 2 atomice 2200.1's on it. well, it should survive 5kw shouldn't it?

it can take a good bit over 5k for burps:naughty:

 

[tommyk90 5,000+ posts]

LAWL.
SUV > Trunked sedan n00bx

Hatch > All

Trucks

 

Unless you are trying to presurize a **** suburban with the extra row of seats with a single 10...thoes **** things are like busses. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

Hey now, i take offense to that statement!!

 

 

FYI, that box is setup completely wrong for an SUV. I would sense an instant 2-3 dB gain doing sub firing up and ports firing back.

 

[prochobo 10+ year member]

So you're comparing your two 12's in a sedan against a single 10" in an SUV

You wanted to see all the haters' daily scores so there you have it. I ain't hating, but I think a 137 with 2000 watts is not good. I don't care if it's a 10", 12", 15", etc. 2000 watts and 137db = //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[smd4life 5,000+ posts]

ricky, no matter how loud your car is or what you can do at the headrest...you still drive a cavalier

 

[Ricky616 10+ year member]

ricky, no matter how loud your car is or what you can do at the headrest...you still drive a cavalier

so..... its a cavy i dont care what do u drive?//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif and i wasnt trying to say im loud because im not i was just letting the person that hit a 139 kno that

 

[smd4life 5,000+ posts]

hahha nice u got us //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif lol im still louder haha 141 @headrest no tweaking car off //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

you were implying that you were loud...and i drive a maxima

 

[Ricky616 10+ year member]

you were implying that you were loud...and i drive a maxima

well i wasnt so it was a joke //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[tRiGgEr 5,000+ posts]

FYI, that box is setup completely wrong for an SUV. I would sense an instant 2-3 dB gain doing sub firing up and ports firing back.

Ummm no it's not. It's not a SPL install, yet

 

[CBFryman2 5,000+ posts]

Hey now, i take offense to that statement!!

FYI, that box is setup completely wrong for an SUV. I would sense an instant 2-3 dB gain doing sub firing up and ports firing back.

lawl.

Trucks can get loud after you put 200lbs of deadener on the back wall. Tons of pressure is lost there. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[SPL140.2 5,000+ posts]

Ummm no it's not. It's not a SPL install, yet

a new member of the spl world //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[CBFryman2 5,000+ posts]

Ummm no it's not. It's not a SPL install, yet

Boredom broght me back. I dont appreciate being called a queer.

Either way a CRX style wouldnt have an effect on SQ...especially of an MT. You would have easilly gained at least 1dB most likely.

My reccomendation? Build it CRX style sub up with dual 4" aeroports firing back (outside of hte box).

Round off the corners on the inside and brace the shit out of it with all thread. Double baffle it too at least.

With the same tuning and size that alone should get you into the 140's. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Johnny Drama 5,000+ posts]

Hey now, i take offense to that statement!!

FYI, that box is setup completely wrong for an SUV. I would sense an instant 2-3 dB gain doing sub firing up and ports firing back.

And even more in most cases with sub firing side and port out the back...well, outlaw that is.

 

[tommyk90 5,000+ posts]

Ummm no it's not. It's not a SPL install, yet

Doesn't have to be an SPL install for a normal person to tell the difference between the two designs. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

You could retain the same SQ and gain most likely a bunch in the SPL department.

 

[tommyk90 5,000+ posts]

lawl.
Trucks can get loud after you put 200lbs of deadener on the back wall. Tons of pressure is lost there. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I only have 2 layers of the old old old second skin (the first stuff ANT made), and that's all I'm allowed. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I have yet to brace the back wall to see if i gain any dB's.

 

[CBFryman2 5,000+ posts]

2 layres of second skin (the new stuff) on my back wall and i still get a good ammount of flex. at comps ill probably have someone park their fat *** agianst it. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif