mail today

[jmanjr]

The weird thing is you DONT Want a new amp you want money? I said we can send it to bryan and send it to bob to have it fixed and you were totally against that? Let me get pics of the original problem of the subsonic filter knob/gain pushed in, because from your current pics the sub sonic knob looks fine and NOT pushed halfway into the amp as you first claim, and now you see these amps are shipped this way, it seems like everything is going against you, There is no damage to the amp case, no damage to the box, but somehow there is damage to the the cap, but not in bryans pictures, not in mine, so that points in your direction, what else is odd is that 1 cap of a section of 4 is damaged?? Bryan has more pics if needed, but thus far it seems like the point is proven and you need to rethink your approach, because I know, bryan knows, lilmaniac knows thats how amps come and there is no external damage which is very odd when you have internal damage, not to mention bryan has already stated he was the seller to me, and I have never powered it up its been in the box, until you recieved it.....

 

[xtremebassjunky 10+ year member]

im sure that pic you have isnt the same exact amp that you sent me

how sure are you?

cuz you're wrong.

 

[jmanjr]

From your first 2 pics it doesnt look like there is any damage to the box nor the ends of the amp so is everyone looking at this thread blind, or we are all missing what you see (as you go make a new pic to prove to use its damaged now, but wasnt in your first 2 pics)

 

[mazdakid 5,000+ posts]

did he label the amps or something? and mine is the one from the pic on ampguts huh? the amp must have been dropped hard enough to make the screw in the center of the board come out, because that was bouncing around when i picked the box up before i took the amp out. why woud i stab something on an amp that i just bought and wasted my own money on?

 

[xtremebassjunky 10+ year member]

 

[mazdakid 5,000+ posts]

i love it how all you guys that know each other gang up because no one knows me here

 

[mazdakid 5,000+ posts]

i have no idea how it was stabbed. i can take a pic of the bottom of the inside of the amp and you can see where that might have touched the caps. the knobs in that pic would be pushed in if what were the case

 

[jmanjr]

when an amp is dropped it normally bends inward, so explain (why you pulled it out with a screw driver) I mean how the face plate got bent outward from being dropped, that theoretically doesnt make sense.....you understand that correct, and now everyone can read through your post that you have changed your story numerous times as to what the problem with this amp is, and the little FILTER know you so mis labled in your pm is pushed in just behind the case which you could have done yourself, but what really amazes me is there is no damage to the case on the side with the filter knob pushed in, but there is damage to the opposite side?

 

[mazdakid 5,000+ posts]

those knobs are in the midde of the amp, the subsonic filter knob is the one thats sunken down into the amp

 

[jmanjr]

well I dont know patfitz, nor do I know lilmaniac, nor do I know xtremebassjunky, I know nomad40 personally and I have talked to xtremebassjunky a few times, dont know anyone else, and the more you talk, then seem to come up with pictures is guilty alone, because if what your saying was true you would have said everything from the start and had pics to back it up, but this string of events, seems like a story being told.

 

[mazdakid 5,000+ posts]

i didnt even show a pic of the other side. your a piece of shit seller and im not going to ask anything from you. ****ing morons

 

[mazdakid 5,000+ posts]

well the only proof i have here is my girlfriend that was sitting watching the whole time, so i guess i can do nothing against all you guys. bullshit if you ask me, but hey what can i do

 

[jmanjr]

Well that sounds just like what you said in your other defense of about 5 people calling you out for the same type of problems, you have shown a trend here, and I didnt say the other END of the amp, I said the other side referring to the face plate pushed out by the RCAS, but by the FILER it looks fine?? Its your pics, you have convicted yourself look in your pics and you will see exact what I am talking about, how the amp was dropped and got jacked up on the rca input side, but the other side is fine? No bent fins? no dents bends anywhere? and the box is fine?

 

[mazdakid 5,000+ posts]

funny how this guy is the middle man that sold it to me but its my fault that it doesnt work. the 75.1 that i had hooked up before and after this had no problems? weird shit

 

[mazdakid 5,000+ posts]

no i never said the other side looks fine, its bent out, but not as much as the rca side