Looking for clean 10" sub with shallow mounting depth

[metal_head]

I am in the process of putting a system in my truck. I have an 09 F150 Supercrew and I intend to plut a single down firing 10" under the rear seat. It is very shallow under there. I need a sub with LESS than 5.25" mounting depth.

I'm going to send the sub about 300 watts RMS from an Audison SRX. I'm looking for SQ and, well, about all I can find that will fit is the 11" Focal Polyglass. The Focal Auditor fits the bill, too, but I don't think they are SQ.

Anybody have ideas on a 10" sub around 300 watts RMS, less than 5.25" mounting depth built for a sealed enclosure made for SQ?

Click to read more...

 

[SicAudio 5,000+ posts]

MBquart RLP254 (10") or RLP304 (12") both are 2.99" mount depth and work in .5-.65 sealed and are for SQ....

 

[Cruzer 10+ year member]

polk audio mm1040 10"

 

[SicAudio 5,000+ posts]

4.5" on the MoMo

he has no more than 5.25 and needs 1.5-2" on top of the sub ( back vented sub )

good subs tho

I have sold alot of them and never had any complaints yet.

 

[Cruzer 10+ year member]

he asked for a sub with less than 5.25 mounting depth. the polk qualifies. now if he needs it to be less than 4.5 mounting depth, he should probably ask the question correctly next time.

 

[RAM_Designs 5,000+ posts]

SI BM, 3.2" deep.

http://stereointegrity.com/index.php?id=47

 

[RAM_Designs 5,000+ posts]

Dayton Reference HF, 5" deep, and IIRC doesn't have a pole vent to worry about.

Dayton Audio RSS265HF-4 10" Reference HF Subwoofer 4 Ohm | Parts-Express.com

 

[SicAudio 5,000+ posts]

most people do not know the pole vented subs need 1.5-2" clearance tho... not his fault.. but 5.25" means 5.25" accounting for any needed clearance.

you recommended a good sub Cruzer I wasn't saying otherwise.. just pointing out for anyones benefit the needs required..

 

[Cruzer 10+ year member]

most people do not know the pole vented subs need 1.5-2" clearance tho... not his fault.. but 5.25" means 5.25" accounting for any needed clearance.
you recommended a good sub Cruzer I wasn't saying otherwise.. just pointing out for anyones benefit the needs required..

i have np with u, and im not trying to be rude to the OP, but he asked for a sub with 5.25 or less mounting depth. he didnt say his box is only 5.25 deep. so i have to assume he knows what he is doing and needs 5.25 from the sub and he is good.

but thats good info for others to know

 

[SicAudio 5,000+ posts]

you love your momo's I bet? they get down hard for such an inexpensive sub.

 

[Cruzer 10+ year member]

for shallow they are great imo. they also take power decently and did decent on the meter

 

[GLN305 10+ year member]

Check out my Fi X series for sale, the mounting depth is 0.75'' shallower than the website states.