Suicide Bobb
5,000+ posts
SPLC Fails
15" Cerwin Vega Stroker (original). It's the very rare D2 model, which is especially good considering I'm running an amp that does its full power at 1ohm in my car, and my only other 1ohm sub is my APX18 with its shifted motor :/
It came in a custom box built to its exact specs by a Phoenix Gold employee, who did a pretty good job. It's 3.54cft. @ 32hz, with 3/4" mdf all around, a flared port, and some interesting reinforcement.
I should note that when I got it, one of the coils was reading an unstable 100+ohms. Turned out it was one of the leads. Using my "expert" soldering skills (by expert, I mean terrible), I brought it back to life. Also, part of the surround was repaired, which is no issue to me because this sub is no looker in the first place //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
It came in a custom box built to its exact specs by a Phoenix Gold employee, who did a pretty good job. It's 3.54cft. @ 32hz, with 3/4" mdf all around, a flared port, and some interesting reinforcement.
I should note that when I got it, one of the coils was reading an unstable 100+ohms. Turned out it was one of the leads. Using my "expert" soldering skills (by expert, I mean terrible), I brought it back to life. Also, part of the surround was repaired, which is no issue to me because this sub is no looker in the first place //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
