kicker zx2500 problem

[big_mofo 10+ year member]

subs stopped working, amp is going in to protect to power to protect to power constantly while on. do i just need to send in to kicker?

Click to read more...

 

[gnatnoop 10+ year member]

have you tried checking your grounds, it just started doing this out of the blue.. we need more info(electrical. wiring etc)

 

[anj46907 10+ year member]

subs stopped working, amp is going in to protect to power to protect to power constantly while on. do i just need to send in to kicker?

check the coils/ohm load could be caused if one of coils are gone and throwing off the impedance

 

[hunterw 10+ year member]

yep sub could have blown.

 

[big_mofo 10+ year member]

subs not connected. having the dmm hooked to power an ground terminals it reads 13.5 constant. i have a kinetik 1400 up front an a 2000 in the rear. one run of 1/0 everything is fused. subs were playing fine then it just stopped. subs were just kind of popping. once every other second kinda goin with the clicking of the amp switching from power to protect

 

[anj46907 10+ year member]

subs not connected. having the dmm hooked to power an ground terminals it reads 13.5 constant. i have a kinetik 1400 up front an a 2000 in the rear. one run of 1/0 everything is fused. subs were playing fine then it just stopped. subs were just kind of popping. once every other second kinda goin with the clicking of the amp switching from power to protect

so its still doing this without subs being connected?

 

[big_mofo 10+ year member]

so its still doing this without subs being connected?

correct, sub leads read 2ohms still as well, so subs are fine.