[1. Product:
Kicker SX 600.2
2. Specs:
138 watts RMS x 2 at 4 ohms (275 watts RMS x 2 at 2 ohms)
550 watts RMS x 1 bridged at 4 ohms
lockable settings (with keypad security code)
variable high-pass filter (10 Hz - 16 kHz) with adjustable slope (0-36 dB/octave, 6 dB increments)
variable low-pass filter (30 Hz - 20 kHz) with adjustable slope (0-36 dB/octave, 6 dB increments)
high-pass filter can be used as a subsonic filter below 20 Hz
SORT 4-way protection circuitry (short circuit, over voltage, reverse polarity and thermal)
Digital KickEQ single band parametric equalizer with variable center frequency and variable Q
Kompressor expansion/compression circuitry with four settings: Off, Contour, Attack, and Redline
4 memory banks store intricate EQ cut/boost, low-pass crossover, phase, bass boost, sub-sonic filter, and compression settings
Sick Bay technology for real-time diagnostics and troubleshooting (includes pink noise generator)
preamp outputs
UltraMatch gain control for optimal input level matching
cooling fan
removable endcaps
requires 4-gauge power and ground leads — wiring and hardware not included with amplifier
22-3/8"W x 2-9/16"H x 9-15/16"D (with endcaps) 20-1/16"W x 2-7/16"H x 9-15/16"D (without endcaps)
3. Description/Condition:
7-8/10 looks
10/10 working just roved from vehicle. Used to power a SA-8v3
4. Price: :
200 OBO
Item Pictures: View attachment 26555169View attachment 26555168
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
Kicker SX 600.2
2. Specs:
138 watts RMS x 2 at 4 ohms (275 watts RMS x 2 at 2 ohms)
550 watts RMS x 1 bridged at 4 ohms
lockable settings (with keypad security code)
variable high-pass filter (10 Hz - 16 kHz) with adjustable slope (0-36 dB/octave, 6 dB increments)
variable low-pass filter (30 Hz - 20 kHz) with adjustable slope (0-36 dB/octave, 6 dB increments)
high-pass filter can be used as a subsonic filter below 20 Hz
SORT 4-way protection circuitry (short circuit, over voltage, reverse polarity and thermal)
Digital KickEQ single band parametric equalizer with variable center frequency and variable Q
Kompressor expansion/compression circuitry with four settings: Off, Contour, Attack, and Redline
4 memory banks store intricate EQ cut/boost, low-pass crossover, phase, bass boost, sub-sonic filter, and compression settings
Sick Bay technology for real-time diagnostics and troubleshooting (includes pink noise generator)
preamp outputs
UltraMatch gain control for optimal input level matching
cooling fan
removable endcaps
requires 4-gauge power and ground leads — wiring and hardware not included with amplifier
22-3/8"W x 2-9/16"H x 9-15/16"D (with endcaps) 20-1/16"W x 2-7/16"H x 9-15/16"D (without endcaps)
3. Description/Condition:
7-8/10 looks
10/10 working just roved from vehicle. Used to power a SA-8v3
4. Price: :
200 OBO
Item Pictures: View attachment 26555169View attachment 26555168
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).