Kicker subs and Kenwood amp

mr_f4ke
10+ year member

Member
119
0
Cartagena
Hi guys, how about kenwood KAC-810D amp? # Power Output at 2 Ohms, at 14.4V (100Hz, 0.5% THD): 400 Watts x 1

# Power Output at 4 Ohms, at 14.4V (20Hz - 200Hz, 0.5% THD): 200 Watts x 1.

I have 2 CVR12" and i will wire them working at 2 ohms, so i will get 200rms for each sub, they will be in a ported box. This will be sufficient to hit hard?what another choice? thx guys

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring method. Disconnect the Remote wire and put a jumper...
1
181
low level when using RCAs so that knob should be pushed out. The crossover turn it all the way right and use the one on the head unit and set it to 80 hz 12db. Turn bass boost off turning it all...
5
512

About this thread

mr_f4ke

10+ year member
Member
Thread starter
mr_f4ke
Joined
Location
Cartagena
Start date
Participants
Who Replied
Replies
3
Views
332
Last reply date
Last reply from
ghs_wrestler189
IMG_0350.jpeg

DEW123

    Feb 23, 2024
  • 0
  • 0
IMG_5559.jpeg

Buck

    Feb 22, 2024
  • 0
  • 0

Latest topics

Top