Kicker L7

[everclear190 10+ year member]

hey guys i have a question i have a 12" L7 (06 model) it is in a 2.95 cu.ft ported box tuned to 46hz i entered my first dbdrag show this weekend with it and hit a 139. what do i need to do in order to get louder? thanks for any help you could give me

P.s. i have a atomic 2200.1 amp powering it and it is in a pontiac grand am (2 door)

Click to read more...

 

[munchies 10+ year member]

you might find some answers here and if not the people here will def help you out

http://www.caraudio.com/forum/showthread.php?t=63004

 

[bamaboy 5,000+ posts]

hey guys i have a question i have a 12" L7 (06 model) it is in a 2.95 cu.ft ported box tuned to 46hz i entered my first dbdrag show this weekend with it and hit a 139. what do i need to do in order to get louder? thanks for any help you could give meP.s. i have a atomic 2200.1 amp powering it and it is in a pontiac grand am (2 door)

thats not good at all for that much power and tuned that high

how much port area does it have, aero's or slot?

seats folded down? which way is the sub facing

 

[bamaboy 5,000+ posts]

also what were you playing during the burp?

 

[everclear190 10+ year member]

well it is a slot port and yes my seats do fold down. I was playing a burp at the show and i figured that i was at the wrong Hz so then i played a sweep. the sub is facing the rear of the trunk, I used a meter that i have to see what postion was the best to have the sub at and that turned out to be 5" away from the rear of the trunk. Also the port area is 13" long and 4" wide.Thanks again for all your help

 

[patalpine]

more like 5 cubes with 100 inches of port

 

[justinschmiidt 10+ year member]

hey guys i have a question i have a 12" L7 (06 model) it is in a 2.95 cu.ft ported box tuned to 46hz i entered my first dbdrag show this weekend with it and hit a 139. what do i need to do in order to get louder? thanks for any help you could give meP.s. i have a atomic 2200.1 amp powering it and it is in a pontiac grand am (2 door)

where was the mic, what kinda wiring do you have.