kicker l7 tinsel

[cnagot5onit 10+ year member]

i have 2 L710's (dual 4ohm) in a sealed box and a 1200watt concept amp powering them

now one of my subs just stopped playing, i thought it was blown, but i took it out and looked and realized the tinsel got disconnected, so i didnt have a welder with me so i just took another piece of speakerwire stripped both ends and attatched it. about a day later it stops playing it again and i take it out and realize 2 of the wires, one on the black and one on the red have popped off. is there a reason that this is happenening to only one sub?

Click to read more...

 

[Moe Lester 10+ year member]

you are pushing it too hard... where is your gain set and bass boost set

 

[BoominBeast]

get a hammer and hit the corners til its a circle..

hope that helped.

subs done dog in my terms

 

[cnagot5onit 10+ year member]

frequency is about half, subsonic is about half, gain level is about 1/4, the bass remote that connects to the amp is about half, and the headunit is at -5/5

 

[cnagot5onit 10+ year member]

get a hammer and hit the corners til its a circle..
hope that helped.

subs done dog in my terms

alright i did it, but it doesnt seem to play anymore and the cone is cracked badly

 

[BoominBeast]

alright i did it, but it doesnt seem to play anymore and the cone is cracked badly

**** it i thought i was on to something...

I guess you should buy an SX now

 

[cnagot5onit 10+ year member]

**** it i thought i was on to something...
I guess you should buy an SX now

thats what friends are for though right?//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[kotec123 10+ year member]

wow u were beatin the shit outa that kicker....got dammm ur retarded..hahah please try not and do that

 

[cnagot5onit 10+ year member]

can i just reattatch the tinsel to the wire, or not?

 

[Polecat 5,000+ posts]

can i just reattatch the tinsel to the wire, or not?

yes, have a shop do it..

 

[Polecat 5,000+ posts]

get a hammer and hit the corners til its a circle..
hope that helped.

subs done dog in my terms

another un-educated post............

 

[cnagot5onit 10+ year member]

well i can solder it back on cant i?

 

[TypeRBass 10+ year member]

you probably can solder it back on, im not sure though....and when i ran my L7's, i NEVER had one tinsel lead break on them, which surprised me.....it tore the crap out of the spiders...but never had a tinsel lead break, weird.

 

[cnagot5onit 10+ year member]

you probably can solder it back on, im not sure though....and when i ran my L7's, i NEVER had one tinsel lead break on them, which surprised me.....it tore the crap out of the spiders...but never had a tinsel lead break, weird.

i didnt think a 1200 watt concept audio amp was too much for 2 10 L7's

 

[Polecat 5,000+ posts]

i didnt think a 1200 watt concept audio amp was too much for 2 10 L7's

power wise your ok, but over excursion broke it...