SOLD Kicker 2500.1, 2 15'' FI Q's

[rocky 59 5,000+ posts]

Alrighty well a change in plans on my end so my loss, your gain!!

I have 2 15'' FI Q's dual 2 that one has seen around 10 hrs total play time sealed up in my truck thrown around 600-700 watts. The other never even out of the box FI shipped it to me in. so here we go with the pics (pics are of used sub. Can get pics of new one but would have to open the box).

Looking to get 185+shipping on slightly used one. and 215+shipping on the new one.

Now the kicker amp. its 9/10 cosmetically and 10/10 in working condition (had a problem of it going into protect mode on me but it was a bad ground on the trucks part) never pushed over 1/4 of the gain knob up. poor thing never got used for what it was intended to do //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif.

The pics-

Looking to get 475+shipping on the amp.

Well that's all I have for now. And i know the pic's aren't very good but my digi camera is MIA so if you want better pic's pm me and I'll get you some.

As for trades pm me and we'll see what we can do about those.

Click to read more...

 

[nuboot 10+ year member]

What Power Can The Subs Take

 

[Walled_Taurus 10+ year member]

How old is the zx2500.1 and what were you running with it? And is there any cosmetic damage or marks if you will?

 

[rocky 59 5,000+ posts]

i was running one of the FI'd with it around 600-700 watts daily for around 3 months.

The amp is around a year 1/2 - two years old I forget exactly how old.

no marks at all on amp, pretty much prefect.

 

[rocky 59 5,000+ posts]

What Power Can The Subs Take

1000 rms is what FI recommends

 

[rumblebee2 10+ year member]

amp ran at 1 ohm? really good price on the subs.

 

[tv559 10+ year member]

Probably ran at 2ohms. 2 D2= 2 ohm load.

 

[rocky 59 5,000+ posts]

amp ran at 1 ohm? really good price on the subs.

1 ohm load correct. i don't think I've gotten the amp past a "warm to the touch" temp. really powerful s.o.b.

 

[rocky 59 5,000+ posts]

remember im up for trades post or pm what ya gots

 

[vitveet 10+ year member]

Whatcha looking for as far as trades for the sub(s)?

V.

 

[rocky 59 5,000+ posts]

Whatcha looking for as far as trades for the sub(s)?
V.

post it up!! I'll go for subs, amps, and a w200 alpine HU (if this is the case i will have a iva-310d flipout for sale/trade too)

 

[Walled_Taurus 10+ year member]

I was interested in the amp until you said you ran it at 1 ohm. I know from personal experience it puts alot of strain on ZX amps if you run them at anything less than 2ohm in fact they are built you should never run them below 2. They tend to have some issues 9 times out of 10 if you do. But I have a buddy that is still possibly wanting it but he has a ZX1500.1 that he he wants to get rid of if you would consider that as possible trade credit.

 

[rocky 59 5,000+ posts]

I was interested in the amp until you said you ran it at 1 ohm. I know from personal experience it puts alot of strain on ZX amps if you run them at anything less than 2ohm in fact they are built you should never run them below 2. They tend to have some issues 9 times out of 10 if you do. But I have a buddy that is still possibly wanting it but he has a ZX1500.1 that he he wants to get rid of if you would consider that as possible trade credit.

no thanks

 

[rwhitaker04 10+ year member]

please explain how u ran a dual 2 single sub setup at 1ohm?

 

[BushJ311 5,000+ posts]

please explain how u ran a dual 2 single sub setup at 1ohm?

one dual 2 wires to 1 or 4

did you mean 2 dual 2? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif