Jdg784
10+ year member
Yep..I'm God
Alright..well I've had my ups and downs with this sub. I'm running the 12.1 SVC off a rockford 500s amp in a sealed box at 4 ohms. It sounded great and hit hard for the first couple of days. It started acting funny and cutting out..on and off for a couple of days..until I realized that my sister had knocked the power wire from its slot and down close enough to the ground wire that a spark had started jumping from between the two. I quickly corrected that and chopped off the section of the power wire that had been burned. Putting all the wires back in place and having everything working right..it worked fine for 2 days..then in the middle of Eminem's "Superman" it just stopped..the sub made a noise like it was trying to work..but was stuck. Made a clicking type noise and the cone moved slightly, but no bass. Thinking I had blown it I disconnected it and let it sit for a few days. Tried hooking it up to my friends amp (rockford 700s)..(he's running the same sub) and it started working again..I was amazed. So I hooked it back up to mine..and Voila..it worked. Until I started turning the bass back up to its original levels..on several frequencies at medium to loud volume it rattles..LOUD. I know it's not tinsel slap because I tried felting it to get it to stop, but it didn't help. It's almost like the cone is going too far out (the gains are still set where they were when it worked fine, I actually turned them down a little). It is really starting to ****..any ideas?
