Just started fiberglassing...

[the_noob 10+ year member]

Actually, I started last night at around 5:00. I'm making some kickpanels and I only put one small layer because I had to be somewhere for 6:00. Anyway, I had wanted to do some more glassing today, but it still isn't dry:crap:. Obviously, I guess I didn't use enough hardener. Would it be okay for me to keep glassing on top of the wet glass, or will I have to wait? I'm starting to get kind of impatient. Thanks.

Click to read more...

 

[req 5,000+ posts]

mix up some resin thats really rich in hardener [like 1oz] and put a nice layer across the whole thing you have done already, then add another layer or three of glass and regular resin\mkep on top of that and you should be fine. i always put a few extra drops of mkep in my resin just to make sure that does not happen to me //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[the_noob 10+ year member]

mix up some resin thats really rich in hardener [like 1oz] and put a nice layer across the whole thing you have done already, then add another layer or three of glass and regular resin\mkep on top of that and you should be fine. i always put a few extra drops of mkep in my resin just to make sure that does not happen to me //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

thanks.//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif