jl 10w6

[jellyfish420 10+ year member]

if i wired 3 10w6's together in parallel (dvc6) would i end up w/ a 1.5ohm final load? if not how would i wire this, as close to a final 2 ohm load as i can?

Click to read more...

 

[95Eclipse 10+ year member]

that is why jl makes the Slash amps, is for 3 sub 12 ohm configs... if you parallel all 3 u get 1.5 almost exactly... with those subs, I would use a 1000/1 or 500/1 if you don't have the cash for a 1000, the 1000 is optimal for that setup...

 

[simon21 10+ year member]

According to my calculation, it could either be 4 ohms or 1 ohm.

 

[BOOKER 10+ year member]

According to my calculation, it could either be 4 ohms or 1 ohm.

//content.invisioncic.com/y282845/emoticons/yes.gif.2d6d3882a589966b8145fbc57db57f33.gif

 

[jellyfish420 10+ year member]

According to my calculation, it could either be 4 ohms or 1 ohm.

how did you come up w/ 4 ohm???

all i could get is 1, 12, and 36 ohm

 

[simon21 10+ year member]

Each speaker: 2 X 6ohms = 12ohms

3 speakers in parallel: 12/3 = 4ohms final

 

[BOOKER 10+ year member]

Each speaker: 2 X 6ohms = 12ohms
3 speakers in parallel: 12/3 = 4ohms final

//content.invisioncic.com/y282845/emoticons/yes.gif.2d6d3882a589966b8145fbc57db57f33.gif//content.invisioncic.com/y282845/emoticons/yourock.gif.93d527d504392657a77fa577298070a1.gif