Jim Camp: Part Deux

[tRiGgEr 5,000+ posts]

I love your door layout. Looks easy to work with. Old school PG = pimp.

 

[DBfan187 5,000+ posts]

Going to eventually wrap those loose wires with velcro'ed Techflex...

every 4inches I assume........//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[ngsm13 5,000+ posts]

Looks badass. What kinda van?

Do you not READ at all?

NG

 

[Prowler573 5,000+ posts]

No doubt some blood,sweat, and tears invested there, Frosty.

Looks good and with the equipment choices I'll assume it'll sound just as good.

//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[JimJ 5,000+ posts]

every 4inches I assume........//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

Every three and a half, do you not know me at all? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[bigwheel15 10+ year member]

Kinda looks like a Chevy Astro van, but I see it's not.

'94 Ford E-150.

A little reading goes a long way. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[takeabao 10+ year member]

Pretty sweet Jim.

Lovin' the PG Tantrums and flatcone.

I'm curious as to how those Sync6's sound -- they remind me of a Vifa MG cone/basket albeit covered in carbon kevlar... //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[vladd 10+ year member]

those cones are hot, you need to find a way to show them off

 

[JimJ 5,000+ posts]

Well, the install is technically done, but I'm having major problems...like no midrange whatsoever. Tweets work fine, but there's nothing from 4kHz to 63Hz //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Need to measure if I'm getting any voltage coming out of the Xover, if I'm not...I've got issues.

 

[ngsm13 5,000+ posts]

Well, the install is technically done, but I'm having major problems...like no midrange whatsoever. Tweets work fine, but there's nothing from 4kHz to 63Hz //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Need to measure if I'm getting any voltage coming out of the Xover, if I'm not...I've got issues.

p00px. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

NG

 

[squeak9798 5,000+ posts]

Well, the install is technically done, but I'm having major problems...like no midrange whatsoever. Tweets work fine, but there's nothing from 4kHz to 63Hz //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Need to measure if I'm getting any voltage coming out of the Xover, if I'm not...I've got issues.

Ouchy //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Hope you get that sorted out. With any luck it'll just be a loose connection.

 

[JimJ 5,000+ posts]

No dice, it's not a loose connection. Think it's something going screwy in the head unit, because when I hook just the mid (no tweet) up to the output of the amp (but before it gets to the Xover), I'm just getting high frequencies. No midrange at all.

Guess it's time to mess around with the head unit, though I thought I set it correctly the first time //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[JimJ 5,000+ posts]

Yup, my wiring was right, 'twas an issue with the head unit that I didn't foresee. When set to 3way mode, what used to be the front preout now is the HF preout. The LF one is the rear pre, which convienently was disconnected.

Since I'm not running active (yet), I need to go to Radioshack to pick up two male-to-female Y-adapters. ****.

Oh well, pics will come later tonight then :/

 

[vladd 10+ year member]

glad it was nothing serious. but i'm curious as to how you're running the setup? isn't the amp a two channel?

 

[ngsm13 5,000+ posts]

Yup, my wiring was right, 'twas an issue with the head unit that I didn't foresee. When set to 3way mode, what used to be the front preout now is the HF preout. The LF one is the rear pre, which convienently was disconnected.
Since I'm not running active (yet), I need to go to Radioshack to pick up two male-to-female Y-adapters. ****.

Oh well, pics will come later tonight then :/

Duh.

Why not just keep it in Front/Rear/Subwoofer mode for the time being?

NG