Jeep Grand Cherokee w/ 4 15"s.....walled *Pics*

[Heavy Hitta 10+ year member]

BTW the top box has no back because its going to be 3/4in plexi w/ blue L.E.D's so it can been seen from the back

 

[Heavy Hitta 10+ year member]

View attachment 26503631

 

[na_rsx 10+ year member]

are you going to use any bracing?

 

[Heavy Hitta 10+ year member]

there is bracing on the front baffel, but none from top to botton or side to side because its a really tight fit and dosent have the room to flex. the back piece is going to be doubbled up with 3/4 also. I tested only 2 15's yesterday and there was no flex. waiting on the other 2 15's to be shipped

 

[18inchjeepin 10+ year member]

that looks pimp, can't wait to see the plexi in

 

[req 5,000+ posts]

i guarantee there is flex.

its not possible to have enclosures that large and not have flex. sorry, just not gonna happen unless its surrounded by cement. cool project tho.

 

[audioholic 5,000+ posts]

I agree, you really should add some simple bracing. Its not too late.

 

[DB_DRAG_SPL 10+ year member]

I agree, you really should add some simple bracing. Its not too late.

X3

 

[sexyvic1 10+ year member]

has this been metered? what did it hit?

 

[audioarsonal 10+ year member]

Flex will occur!!!!!!And 116 sqin of port..It must be pretty long for 34 hz?

 

[tez4life Premium Member]

I agree, you really should add some simple bracing. Its not too late.

x4, even if its some simple wooden dowels, it would help alot. Hate to see all that work go into it and loose output over something simple that was over looked.

Interesting build, and looks good so far.

 

[RogerKline 10+ year member]

Flex will occur!!!!!!And 116 sqin of port..It must be pretty long for 34 hz?

It's 34.5. Big difference.