is this safe?

[perfecxionX 10+ year member]

i cant find a cheap distro block that has 1/0 input with 1/0 and 4guage output. I was planning this but want to make sure its safe before i do it.

If you know of a distro that can do what i want (will need to be fused, and accept a 200amp and 100amp fuse for the 1/0 and 4 guage outs)

Click to read more...

 

[xNaStYx 10+ year member]

ya why not?

 

[revrider1 5,000+ posts]

Hmm, no comment...

 

[perfecxionX 10+ year member]

Hmm, no comment...

a post with no comment. useful.

if this is wrong or i have another option, im making this thread to hear that better option.

 

[Chin_Chilla 10+ year member]

Hmm, no comment...

Then why comment...lol

 

[revrider1 5,000+ posts]

yea, well...

It will work, just wrap it with electrical tape or something...

 

[xNaStYx 10+ year member]

Then why comment...lol

Why did you comment?

 

[perfecxionX 10+ year member]

i know its cheap looking, but i figured i could hide it pretty easily. seriously though, i cant find a distrobution block to do this properly, because the few that will do 1/0 input and 1/0 output will not accept a fuse as big as 200amps, and i sure as hell am not doing another run from the battery if dont have to.

 

[SPL-Master 10+ year member]

yea, well...
It will work, just wrap it with electrical tape or something...

this!...make sure you insulate it good because you don't want power wire loose where ever you put that !

 

[revrider1 5,000+ posts]

this!...make sure you insulate it good because you don't want power wire loose where ever you put that !

Indeed

 

[91Chevy 10+ year member]

As long as the terminals/bolt aren't exposed, it should work just fine.

 

[perfecxionX 10+ year member]

anyone know where i can get a 200amp AFS or KF series fuse?

 

[93dakota 10+ year member]

here is a fused distros that you can use

http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-22D

 

[goodstuff 10+ year member]

I'd stay away from knu, or do your research before you buy it.

 

[perfecxionX 10+ year member]

here is a fused distros that you can use
http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-22D

The output side can be adjusted to accept 4 Gauge or 8 Gauge cables

i need a distro that will do:

input: at least one 1/0 input

output: at least one 1/0 ouput---and---at least one 4 guage output

that distro will not do 1/0 output, and the largest mini anl fuse i can put in it is 150amps. I need a minimum 200 amp fuse for the 1/0