Is this safe for now? And what rca cables do I need?

[scheibler 10+ year member]

I had a buddy start to help me install my system. We found out that I didn't have any rcs cables right after he ran the power and remote turn on wires down the left side off my car into my trunk. We decide to stop, and there wasn't any electrical tape so we just put the wire underneath the sub box so it will not move and is touching my box and trunk carpet with no metal around, but is strill connected to the battery.

1-Is this safe till maybe monday or tuesday with the power wire connected to my battery?

2-Should the 150a fuse protector be next to my battery under the hood or in the trunk near my amp/sub?

3-What and how many rca cables do I need to run my dual 2 ohm sub @ 1ohm from an orion 600d and a kenwood mp-328 hu?

Click to read more...

 

[Alpineinstaller 10+ year member]

fuse holder next to batt, 1 set of rcas, get some electrical tape

 

[scheibler 10+ year member]

will the wire catch fire if not electrical taped even if I make sure it doesn't touch any metal? I can't find any and really don't wwant to go pay $5 for maybe 3 days, but will compared to 8,000 if I have too

 

[jrz126 10+ year member]

can you just disconnect the power wire from the battery?

or just install the fuse holder up by the battery, and dont put the fuse in it.