Intermediate power to head unit

  • 2
    Participant count
  • Participant list

eRok-hba

Junior Member
1
0
US
This is a new issue continued from an old thread "no power to deck" if interested to back track. i have discovered after buying a new touch screen head unit & wiring harness / interface that it will now do 1 of three things. 1.)Powers on with the turn of the key & powers down when key of in off position (as it should). 2.) It powers on with the turn of the key, but it never shuts down completely leaving some blue lights on in the physical buttons and completely drains the battery over night. 3.) It never turns on. This being the sitation explained from my previous thread. Im lost this is so ridiculous i am about loose my marbles. ANY genius advice for my mystery?

Sent from my Nexus 6 using Tapatalk

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Run the biggest AGM you can under the hood, the parallel runs to one of these - should be everything you need and then some...
5
391
What amplifier(s) are you using? What speakers? Is this your main battery or is it a 2nd battery? If it is a 2nd, how are you wired up? What if...
2
301
That’s the little single 6.5 inch enclosure. The Savard did just as well as the RDS. These subs do well in ported or 6th orders but not as well...
12
648
With 6500 rms.. you are still going to need some battery bank and/or supply for that demand
2
17

About this thread

eRok-hba

Junior Member
Thread starter
eRok-hba
Joined
Location
US
Start date
Participants
Who Replied
Replies
1
Views
384
Last reply date
Last reply from
Boomin_tahoe
IMG_7544.png

Chris Gerrish

    Apr 25, 2024
  • 0
  • 0
IMG_1309.jpeg

vlusardi

    Apr 24, 2024
  • 0
  • 0

Latest topics

Top