installing comps?

[BloodyGuts335i 10+ year member]

I am trying to install some components in my gf's car (mazda millenia) and I came accross a problem that I've never seen in a car. As I take off one end of the rubber grommet on the inside of the door where all the wires from the cabin goes through and go in the door panel to try to pull the speaker wire through. I noticed that instead of wires, its a wire harness there. there is no space what so ever for any additional wires. Now I dont know how to run the wire in from the cabin!. can anyone help me? its a 1995 mazda millenia if anyone ever delt with one. thanks in advance

Click to read more...

 

[91Chevy 10+ year member]

Pics? Is there any room in the plug to drill a hole?

 

[BloodyGuts335i 10+ year member]

here is the pic. there is no room to drill anything on the harness itself. the white piece pulls off but then the other end of the harness with all the pins stays in place and covers the hole

 

[nuugen 10+ year member]

1) Try to get that connector pulled as far into the door jam as possible, and look for any open spots in the connector to send wires through..

2) look for any unused grommets in the door/door jam to run wires..

3) Last resort, drill your own holes in the jam and door to run your own wires, be sure to use grommets/sealant/loom...