install i finished last night

[pd8731]

how power hungry is that crunch amp...iv got two sittin here in my room im waitin to hook up nd wonderin how uv found urs so far??

Crunch amp is not power hungry whatsoever. Get a decent batt and you're set.

nice install, but if I were you, I would put some rubber cushions on those screws. You don't want that amp to take too much of a beating //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Don't mount the amp to the box. All the rubber mounting feet in the world won't protect it. It will eventually break. Mine did. A solder point broke in a matter of days with the same subs as the OP. I fixed mine, but he may not get so lucky. Take the amp off the box ASAP!

 

[OoMesKoO 10+ year member]

all in all its a badass install man!

Dont like the location of those voltmeters though. You should get them up on the dash somewhere.

 

[350zspl 10+ year member]

^^^^^^^^^^ thank you very much ^^^^^^^^^^^^^^^

 

[SirJoseph8989 10+ year member]

well i think i got enough...Iraggi 200alt, big three, yellow top under the hood, kinetik 2400 in the rear, nd a mix of kicker hyperflex nd KnuKoncept Kolossus 1/0 wires

 

[350zspl 10+ year member]

should be good

install

run car , turn on AC, turn on head lights , crank volume , measure volt at amp on full tilt

 

[350zspl 10+ year member]

Crunch amp is not power hungry whatsoever. Get a decent batt and you're set.


Don't mount the amp to the box. All the rubber mounting feet in the world won't protect it. It will eventually break. Mine did. A solder point broke in a matter of days with the same subs as the OP. I fixed mine, but he may not get so lucky. Take the amp off the box ASAP!

i will bulld amp rack and remove GP3000 from enclosure

thanks

will do

 

[kovemaster559 5,000+ posts]

nice install did you seal the trunk off>?

 

[350zspl 10+ year member]

waiting to meter it on the 6th before i seal it

sounds deeper drivers face back

sound like it may be louder face forward

 

[SirJoseph8989 10+ year member]

aight thanks man, nice install btw...g/l with the meter

 

[RipDaJacka]

cool

 

[Hintzyboy 5,000+ posts]

Looks kinda sloppy to me. But it should clean up some when you build the amp rack.