IDmax v3 or FI Q........! For super lows

[rc10mike 10+ year member]

I have 2 IDmax 12's currently and looking for more 30hz and below output.

I will be running in a 1.3 cuft per ch. sealed box ONLY!

Will the FI Q have more output below 30hz than the IDmax's? Never had FI and looking for opinions?!?!

Also considering Rl-p's

Click to read more...

 

[innsanes 10+ year member]

Idmax murders the fi Q in lows lows. Look into tc-3000 or a Dayton titanic

 

[chaunb3400 10+ year member]

get the Q..and if you dont like it sell it

 

[rc10mike 10+ year member]

I used to have 2 IDmax V2's, which seemed to hammer the lows (below 30) a lot more than the v3's. They are in the same box, and the v3's are getting 2x the power!

 

[thehardknoxlife 10+ year member]

The IDmax gets louder lower. I can't comment on the rl-p I've never heard it.

 

[audioholic 5,000+ posts]

Look for some old Avalanches.

 

[BLD 25 10+ year member]

maybe adjust your box size and tuning first

 

[NDMstang65 10+ year member]

Idmax murders the fi Q in lows lows. Look into tc-3000 or a Dayton titanic

How much volumetric displacement do both woofers have?

After all...low frequency extension is all about excursion...

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[innsanes 10+ year member]

I used to have 2 IDmax V2's, which seemed to hammer the lows (below 30) a lot more than the v3's. They are in the same box, and the v3's are getting 2x the power!

There you have it, switch back to the v.2

 

[denim 5,000+ posts]

get the Q..and if you dont like it sell it

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[81elocd]

some 12" 3hp's would be ftw //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[jrouter76 10+ year member]

maybe adjust your box size and tuning first

sealed box

 

[gymfreak101 10+ year member]

Arc Audio Flatlines, I have owned both series of the idmax and the flatlines I like the low end on the Arcs better and they are able to handle more power. The arcs can be had cheaper also.

 

[Buck 5,000+ posts]

in a sealed box, the fi q would hit the lows pretty good

 

[Immacomputer 10+ year member]

For below 30hz performance, get rid of those small sealed enclosures.