I wanna be LOUD

[BoomingCreation 10+ year member]

Originally posted by cranker289  

It'll be a little over a year 'till I get my car (I'm 14), I already have a job, I've got $500 in my pocket, and there's always the bank, so money isn't really much of a problem //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif.

If money aint a thing then look into DD.

http://www.ddaudio.com

 

[RangerMan Premium Member]

Originally posted by BoomingCreation  

Loyd (bigbassman) on here had suprisingly good sq with them, even in the big box.

 

The idmax's are tight, a team mate of mine and loyds runs 9 of them with 18 rf bd1000s, and everynow and then 36 bd1000s.

 

But he is running RF power hx2s right now. but maybe going to switch, even with all that power it slammed and still wasnt muddy

From what I have heard, the only way to get descent SQ out of a DD sub is to put them in a big box, over 3 cu ft per sub...

 

[BassiKLowZ 10+ year member]

the mmats pro cast cost 179 for the 12 in i would check on them or posibly if u can listen ot some of them

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif im glad some 1 finally mentioned these subs other then me.... i had 4 in a CRX and they are probably one of the most slept-on subs out... hell the MMATS pro is a gret sub too and they dont get too much recognition... and for anyone that wants bang for their buck... the Small cousin of the MMATS pro (the MMATS 12) is a bad AZZ sub for the price (109.00)

 

[cranker289 10+ year member]

What are some good amps to go with the subs that you guys reccomended?

 

[bumpin_blazer 5,000+ posts]

hey rangerman how about 6.5cuft per sub you think that will give me some decent sq?? oh and to booming creation, my friend wants to sell me a new amp that does 2500watts rms at 1 ohm and i was wondering if those 3515's will handle that as a daily driver??

adam

 

[RangerMan Premium Member]

Originally posted by bumpin_blazer hey rangerman how about 6.5cuft per sub you think that will give me some decent sq?? oh and to booming creation, my friend wants to sell me a new amp that does 2500watts rms at 1 ohm and i was wondering if those 3515's will handle that as a daily driver??

 

adam

6.5 should be a good enclosure, but you will probably have to ask Loyd...

 

[Killa sin 10+ year member]

where can I get a pro-cast for $179?

 

[BoomingCreation 10+ year member]

Originally posted by bumpin_blazer hey rangerman how about 6.5cuft per sub you think that will give me some decent sq?? oh and to booming creation, my friend wants to sell me a new amp that does 2500watts rms at 1 ohm and i was wondering if those 3515's will handle that as a daily driver??

 

adam

What amp is it? That he says 2500watts? I wouldnt use that daily driven. Id only use it at a competition on a burp. Or turn the gain down. if you wanna daily bump with power like that then I would look into the 9515s

 

[bumpin_blazer 5,000+ posts]

yeah the amp is an MA audio HC 2500 at 1 ohm rms amp. i know i asked a sales rep from DD and i told them i was going to do a 2000wrms setup and they said it would be fine i'm not to sure about running 2500wrms though.

adam

 

[Big-Cat 10+ year member]

i'm pretty sure that i've heard that Ma Audio amps are over rated...so you probably wouldn't be getting a full 2500 watts

 

[BoomingCreation 10+ year member]

Originally posted by Big-Cat i'm pretty sure that i've heard that Ma Audio amps are over rated...so you probably wouldn't be getting a full 2500 watts

Ive heard the same and that there also power hogs.