i dont know how or y or what

Big_Nasty_Beat
10+ year member

Member
But i got a juggernaut 15 on a rf bd1000 the sub is rated for 1500wrms and could handle alot more than that anyway its a dual 1.4ohm sub and my amps puts out 1000 @ 2ohms but is able to push more wit more volts. Now i turn it on and it didnt work today and i did everything til i fig that it blew a coil on the sub dont know how or y or what could of done it but it did. The amp was only pushing a 1000wrms to it so how? by under powering it ? anyway i need to know if i can fix the sub and where to bring it and a price

 
well one of the coils dont do anything and the other says 1 ohm but still i dont see how that happened and the gain wasnt up more than 3/4
On my old Rockford T1000 and a deck with 5v preouts. According to my DMM and a 0db test tone my amp was putting out 1k RMS at about 30% gain. So I would guestimate they you were sending a pretty nasty clipped signal at 75% gain. Especially if you also had the bass boost turned up some.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Big_Nasty_Beat

10+ year member
Member
Thread starter
Big_Nasty_Beat
Joined
Location
Nebraska
Start date
Participants
Who Replied
Replies
8
Views
626
Last reply date
Last reply from
Paaco1981
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top