superdooperman
10+ year member
Member
So I recently installed my Rainbow SLC's and they sound great. I am still in the break in phase so im being gentle on the gains and tuning for now, but I was wondering about HPF and crossover points.
Basically my deck has a HPF I can set at 80, 100, and 120, unsure of the slope. MY amp has a variable crossover for the HPF at 24db slope.
Does using both the HPF from the HU then from the amp as well effect the crossover slopes? Should I stick with only the amp HPF?
This Ti 400.2 I have is really finiky on the crossover dial. It has such a wide range on it I have really no idea where it is set, since not even a quarter turn of it moves it from 40 - 180.
Suggestions?
Basically my deck has a HPF I can set at 80, 100, and 120, unsure of the slope. MY amp has a variable crossover for the HPF at 24db slope.
Does using both the HPF from the HU then from the amp as well effect the crossover slopes? Should I stick with only the amp HPF?
This Ti 400.2 I have is really finiky on the crossover dial. It has such a wide range on it I have really no idea where it is set, since not even a quarter turn of it moves it from 40 - 180.
Suggestions?