how do i wire this sub and amp together (pics)

[mrkiki911 10+ year member]

ok thanks for the help guys

last question-

dual voice coil @ 4 ohms

does that also mean 2ohms on each?

or each run @ 4ohms?

 

[phyphoestilic 5,000+ posts]

ok thanks for the help guys
last question-

dual voice coil @ 4 ohms

does that also mean 2ohms on each?

or each run @ 4ohms?

it kinda means what it says, Dual voice coil @ 4ohms, so each voice coil is 4 ohms.

 

[lincolnls 10+ year member]

enne mene miny mo it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

doesnt matter they connections are parealled internally anyway.

they do that so you can hook 2 subs up to a 1 channel amp. or hook 1 dvc sub up to one amp, or 2 dvc subs up to 1 amp.

its vesatile amp, takes the guess work out of installation, opps i guess not //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif j/k

 

[mrkiki911 10+ year member]

ok thanks everyone

ur all free to lol@teh noob

 

[mrkiki911 10+ year member]

so i had everything wired... and the sub didn't hit hard at all. Some pos (piece of shit) 10'' i had in there before hit harder.

wat could be the problem? and if i just wired all the +'s and -'s straight to the amp wat ohms would i be using?

 

[Immacomputer 10+ year member]

It should be 2 ohms. How are your gains set? Crossovers? Subsonic Filter?

Take a 9v battery and apply the positive battery terminal to the positive wire on ONE of the voice coils and do the same for the negative. The sub should move out. Then try the same thing with the other coil. The sub should move out as well. If one moves out and the other moves in, reverse one of the speaker leads.