hooking up a amp for my fronts and rears

[assassin1840 10+ year member]

im going to be hooking up new speakers all the way around and im going to be hooking an amp to them. question is do i rewire all the wires with new wires i picked some up 16 gauge stinger hpm and i just didnt know if the regular stock ones will work and if so i could just wire the amp to the stock wires behind the hu and not have to go threw the doors and a bit more pain, i will if i have thou. i have a 97 civic ex and i will be pushing 75 rms threw the wires each channel

Click to read more...

 

[wenn_du_weinst 10+ year member]

run new wire, it's worth the extra bit of work

 

[assassin1840 10+ year member]

i was afraid you would say that **** lol well i got an extra five ft for each section in the front to get threw all the panels it just looks like its going to be a pain in the ***

 

[wenn_du_weinst 10+ year member]

molex plugs I'm guessing you will need to drill through the connectors. The factory is dirty 18ga most of the time. clean 16ga will be much much nicer

 

[assassin1840 10+ year member]

thanks well that plug is going threw my fender wall and somewhere behind my glove box underneath some where thats the hard point i cant see anything and ive ripped whole car plastics apart tons of times in my job at work

 

[sacsking916 5,000+ posts]

run new wires, running the wire in my civic for speakers didnt take much time at all.

 

[assassin1840 10+ year member]

run new wires, running the wire in my civic for speakers didnt take much time at all.

how did u put ther wire threw in the fronts threw the wire plug between the door and frame i cant see where it goes to